Description
This is a Siemens 6AV7874-0BA20-0AC0, a SIMATIC Panel PC 677B designed for industrial human-machine interface (HMI) and control applications. It features a 17-inch touchscreen display with a 1280 x 1024 resolution, powered by an Intel Celeron M440 1.86 GHz processor. The unit is equipped with 1 GB of DDR2 RAM and a 160 GB SATA hard drive. Connectivity options include dual Gigabit Ethernet, multiple USB 2.0 ports, a serial port, and an integrated PROFIBUS/MPI interface with 2MB of buffered SRAM. This model is configured with a 110/230 V AC power supply and comes pre-installed with Windows XP Professional MUI.
Features
- 17-inch color touchscreen display
- Intel Celeron M440 processor operating at 1.86 GHz
- 1 GB DDR2 system memory
- 160 GB 3.5-inch SATA hard disk drive for storage
- Integrated PROFIBUS/MPI communication interface
- Dual 10/100/1000 Mbit/s Ethernet ports for network connectivity
- Four rear-mounted USB 2.0 ports and one front-accessible USB port
- Two PCI slots for hardware expansion
- Pre-installed Windows XP Professional MUI operating system
Applications
- Process visualization and control (SCADA/HMI)
- Machine data acquisition and logging
- Factory floor operator stations
- Industrial automation gateways
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 677B |
| Product Type |
PC Panel |
| Display |
17-inch Touchscreen |
| Resolution |
1280 x 1024 pixels |
| Processor |
Intel Celeron M440, 1.86 GHz |
| Processor Cache |
1 MB SLC |
| Memory (RAM) |
1 GB DDR2 |
| Storage |
160 GB SATA HDD (3.5-inch) |
| Optical Drive |
Not included |
| Ethernet Ports |
2 x 10/100/1000 Mbit/s |
| USB Ports |
4 x USB 2.0 (rear), 1 x USB (front) |
| Serial Port |
1 x COM1 |
| Fieldbus Interface |
PROFIBUS/MPI with 2MB Buffered SRAM |
| Expansion Slots |
2 x PCI |
| Power Supply |
110/230 V AC, NAMUR compliant |
| Included Cable |
Europe Power Supply Cable |
| Operating System |
Windows XP Professional MUI (de, en, fr, es, it, ja, zh, ko) |
| Product Lifecycle Status |
Obsolete |
| Country of Origin |
Germany (Estimate) |
| Shipping Weight |
12.00 kg |
| Package Dimensions (Source) |
35.0 x 25.0 x 25.0 cm |
Installation Guidelines
CRITICAL WARNING
Failure to ensure adequate ventilation clearance around the unit can lead to overheating, component failure, and system shutdown. Maintain specified clearances on all sides as per the enclosure design. Disconnect all power sources before installation or maintenance.
-
1
Verify the panel cutout dimensions against the device's mechanical drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
-
2
De-energize the main control cabinet and apply Lockout/Tagout (LOTO) procedures. Confirm the absence of voltage before proceeding.
-
3
Insert the Panel PC into the prepared cutout from the front of the panel. Ensure the front bezel gasket is properly seated against the panel surface to maintain ingress protection.
-
4
From the rear of the panel, install and progressively tighten the mounting clamps in a crisscross pattern to ensure even pressure distribution. Do not overtighten.
-
5
Connect the protective earth (PE) conductor to the designated chassis grounding point using a low-impedance connection. This is critical for electrical safety and noise immunity.
-
6
Connect the AC power supply, Ethernet, PROFIBUS, and any other required I/O cables. Ensure all connectors are securely seated. Route cables to prevent strain and interference.