Description
This is a Siemens 6AV7875-1BF52-1AC0, an industrial-grade SIMATIC Panel PC from the 677B series. It is equipped with a 19-inch touch display and powered by an Intel Core 2 Duo T7400 processor. The system includes 4 GB of DDR2 RAM and a redundant storage configuration with two 250 GB SATA hard drives in a RAID1 array. For industrial connectivity, it features dual Gigabit Ethernet ports and an integrated PROFIBUS/MPI interface. This unit is designed for demanding HMI and control applications and comes pre-installed with the Windows XP Professional operating system.
Features
- 19-inch touch screen with 1280 x 1024 resolution
- Intel Core 2 Duo T7400 processor at 2.16 GHz
- 4 GB DDR2 RAM for application processing
- RAID1 configuration with two 250 GB SATA hard drives for data redundancy
- Integrated PROFIBUS/MPI communication port
- Dual 10/100/1000 Mbit/s Ethernet ports
- Internal DVD+-R+-RW optical drive
- Pre-installed Windows XP Professional (Multi-Language User Interface)
Applications
- Human-Machine Interface (HMI) for process control
- SCADA client for plant-wide visualization
- Machine-level data acquisition and logging
- Industrial control and automation platforms
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Product Series |
SIMATIC Panel PC 677B |
| Display |
19-inch Touch Screen |
| Resolution |
1280 x 1024 pixels |
| Processor |
Intel Core 2 Duo T7400, 2.16 GHz |
| Cache |
4 MB SLC |
| Memory (RAM) |
4 GB DDR2 |
| Buffered Memory |
2 MB Buffered SRAM |
| Storage |
2x 250 GB SATA (2.5-inch) Hard Drives |
| Storage Configuration |
RAID1 (Mirroring) |
| Optical Drive |
DVD+-R+-RW |
| Expansion Slots |
1x PCI, 1x PCIe x4 |
| Ethernet Ports |
2x 10/100/1000 Mbit/s |
| USB Ports |
4x USB 2.0 (rear) |
| Serial Port |
1x Serial (COM1) |
| Fieldbus Port |
PROFIBUS/MPI |
| Front USB |
Not available on this model |
| Power Supply |
110/230 V AC with NAMUR |
| Power Cable |
Europe type included |
| Operating System |
Windows XP Professional MUI (de, en, fr, es, it, ja, zh, ko) |
| Product Lifecycle Status |
Obsolete |
| Manufacturer |
Siemens |
| Country of Origin |
Germany (Estimate) |
| Shipping Weight |
17.00 kg |
| Package Dimensions (Calculated) |
67.0 x 83.0 x 11.5 cm |
| Commodity Code |
85371098 |
| ECCN |
N |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Installation must be performed by qualified personnel only. Failure to de-energize equipment and follow Lockout/Tagout (LOTO) procedures before installation can result in severe injury or death.
-
1
Prepare for Installation: Verify the panel cutout dimensions match the unit's requirements. Ensure the mounting surface is clean, flat, and can support the PC's weight (17.00 kg).
-
2
Mount the Unit: Insert the Panel PC into the prepared cutout. Secure it using the provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal and prevent chassis distortion.
-
3
Establish Ground Connection: Connect the chassis grounding terminal to the cabinet's main protective earth (PE) busbar using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
-
4
Connect I/O and Power: Route and connect all communication cables (Ethernet, PROFIBUS, USB, Serial). Maintain separation between power and signal cables to minimize interference. Connect the AC power cord to a stable, correctly rated power source.
-
5
System Power-Up: After verifying all connections are secure, remove LOTO devices and apply power to the unit. Proceed with system configuration and software installation as required by the application.