Siemens 6AV7882-0DB20-2CF0 SIMATIC IPC277E Nanopanel PC

Description

The Siemens 6AV7882-0DB20-2CF0 is a SIMATIC IPC277E Nanopanel PC designed for demanding HMI and control tasks in industrial environments. This unit features a 15-inch Touch TFT display, driven by an integrated Celeron N2930 (4C/4T) processor with 4 GB RAM and a 240 GB Solid-State Drive (SSD) for reliable performance. It is pre-configured with Windows Embedded Standard 7E SP1 and a WinCC RT Advanced V16 runtime license, supporting up to 2048 PowerTags. The device requires a nominal 24 V DC power supply and offers extensive connectivity through dual Gigabit Ethernet, DisplayPort, and multiple USB ports.

Features

• ■15-inch Touch TFT color display for operator interaction.
• ■Powered by an Intel Celeron N2930 quad-core processor.
• ■Equipped with 4 GB of system memory (RAM).
• ■Includes a 240 GB Solid-State Drive (SSD) for storage.
• ■Pre-installed with Windows Embedded Standard 7E SP1 (64-bit, English).
• ■Bundled with WinCC RT Advanced V16 software (2048 PowerTags license).
• ■Features dual 10/100/1000 Mbps Ethernet ports for network connectivity.
• ■CFast slot available for storage expansion.

Applications

• ■Human-Machine Interface (HMI) for machinery control.
• ■SCADA visualization nodes in process control systems.
• ■Data logging and acquisition terminals.
• ■Plant floor information displays and control stations.
• ■Building automation and management systems.

Technical Specifications

Installation Guidelines

1. 1
   Prepare Panel Cutout: Prepare the mounting cutout in the control cabinet panel according to the dimensions specified for the 15-inch display. Ensure the mounting surface is clean, flat, and provides adequate support.
2. 2
   Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal and secure fit.
3. 3
   Connect Protective Earth: Connect the protective earth (PE) terminal on the unit to the cabinet's main ground connection using a low-impedance conductor. This is essential for safety and noise immunity.
4. 4
   Connect Power Supply: Connect the 24 V DC power supply to the designated power connector. Double-check for correct polarity (+/-) before energizing the circuit.
5. 5
   Connect I/O and Peripherals: Connect Ethernet cables, USB devices, DisplayPort monitor (if used), and any serial devices to the corresponding ports on the rear of the unit.
6. 6
   Final Checks and Power-Up: Once all connections are secure, re-apply power to the cabinet. The Panel PC should boot into the pre-installed Windows operating system. Verify system functionality before placing into service.