Description
The Siemens 6ES5458-7LB11 is a relay output module designed for the SIMATIC S5 PLC system. This module provides 16 SPDT relay channels for switching a variety of AC and DC loads in industrial control applications. It is engineered for reliable operation in demanding environments, offering robust performance for controlling motors, valves, and other field devices. The panel-mount design facilitates straightforward integration into standard control cabinets.
Features
-
■Provides 16 independent relay output channels
-
■Features Single-Pole Double-Throw (SPDT) relay contacts
-
■Compatible with both AC and DC load switching
-
■Designed for use within the Siemens SIMATIC S5 automation platform
-
■Panel-mount form factor for easy installation
Applications
-
■Motor and drive control
-
■HVAC system management
-
■Critical process control applications
-
■Energy management systems
-
■General manufacturing automation
Technical Specifications
| Specification |
Value |
| Model Number |
6ES5458-7LB11 |
| Product Series |
SIMATIC S5 |
| Module Type |
Relay Output Module |
| Number of Channels |
16 |
| Contact Type |
SPDT (Single-Pole Double-Throw) |
| Product Status |
Active |
| Condition |
Brand New |
| Shipping Weight |
0.7 kg |
| Package Dimensions (Calculated) |
33 x 5.1 x 20.3 cm |
| Country of Origin |
Germany |
| Manufacturer |
Siemens |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Disconnect and lock out all power sources to the PLC rack and associated equipment before installation or removal. Failure to de-energize the system can result in severe injury or death. All work must be performed by qualified personnel.
-
1
Verify that the control panel is de-energized and locked out. Confirm zero voltage with a calibrated multimeter.
-
2
Identify the target slot in the SIMATIC S5 rack. Ensure the slot is compatible with the 6ES5458-7LB11 module type.
-
3
Align the module with the card guides in the rack and slide it firmly into place until the backplane connector is fully seated.
-
4
Secure the module to the rack using its integrated fastening screws. Do not overtighten.
-
5
Connect field wiring to the front connector terminals. Use appropriate wire gauges and ferrules. Ensure signal wiring is routed separately from high-voltage power cables to minimize noise.
-
6
After all connections are verified, remove the lockout/tagout devices and re-energize the system. Monitor module status indicators for correct operation.