Description
The Siemens 6ES7647-6BB21-5BB0 is a SIMATIC BOX PC 627B designed for robust performance in industrial environments. This unit is configured with a Celeron M 440 processor operating at 1.86 GHz, 1 GB of DDR2 RAM, and a 160 GB SATA hard drive for local data storage and application hosting. It comes pre-installed with Windows XP Professional SP2. Connectivity is extensive, featuring dual Gigabit Ethernet ports, a native PROFIBUS/MPI interface, and multiple USB 2.0 ports. Integrated monitoring functions such as a watchdog timer and temperature/fan monitoring enhance system reliability for critical plant-floor applications.
Features
- Processor: Intel Celeron M 440 (1.86 GHz, 1 MB L2 Cache)
- Memory: 1 GB DDR2 667 SODIMM RAM
- Storage: 160 GB SATA Hard Disk Drive (HDD)
- Optical Drive: DVD+/-RW
- Fieldbus Interface: Onboard PROFIBUS/MPI
- Ethernet: Dual 10/100/1000 Mbit/s ports
- Power Supply: AC 110/230V industrial power supply with NAMUR compliance
- System Monitoring: Integrated watchdog, temperature, and fan monitoring
- Operating System: Windows XP Professional SP2 (Multi-Language) pre-installed
- Expansion: One unassigned PCIe (x4) slot
Applications
- Human-Machine Interface (HMI) and SCADA visualization
- Data acquisition, logging, and processing
- Machine-level control and automation tasks
- Industrial gateway for protocol conversion
- Manufacturing Execution Systems (MES) terminals
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC BOX PC 627B |
| Processor |
Celeron M 440 (1.86 GHz, 1 MB L2 Cache, 533 MHz FSB) |
| Memory (RAM) |
1 GB DDR2 667 SODIMM |
| Buffered SRAM |
2 MB |
| Storage |
160 GB HDD SATA |
| Optical Drive |
DVD+/-RW |
| Graphics |
Onboard, 128 MB Shared Memory |
| Operating System |
Windows XP Professional Multi-Language SP2 |
| Ethernet Interface |
2 x 10/100/1000 Mbit/s Ethernet RJ45 |
| USB Interface |
4 x USB V2.0 (High Current) |
| Serial Interface |
1 x COM1 (onboard), 1 x COM2 (via PCI card) |
| Parallel Interface |
1 x LPT1 (via PCI card) |
| Fieldbus Interface |
PROFIBUS/MPI |
| Removable Media Slot |
CompactFlash Drive (front-side, without CF card) |
| Expansion Slots |
1 x PCIe (x4) unassigned |
| RAID Controller |
Onboard |
| Power Supply |
AC 110/230V Industrial Power Supply with NAMUR |
| Power Cable |
UK Type |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
7.15 kg |
| Package Dimensions (Calculated) |
45.0 x 47.5 x 27.0 cm |
| Country of Origin |
Germany (Estimate) |
Installation Guidelines
CRITICAL WARNING: This device contains components sensitive to electrostatic discharge (ESD). Always use a grounded wrist strap and work at an ESD-safe workstation when handling, installing, or servicing this equipment. Failure to observe ESD precautions can result in permanent damage to the unit.
-
1
De-energize Equipment: Before installation, ensure the control cabinet and all related power sources are completely de-energized and locked out/tagged out (LOTO) according to site safety procedures.
-
2
Verify Clearances: Install the Box PC in a location that provides adequate ventilation clearance around all sides to ensure proper heat dissipation. Avoid mounting near high-heat sources.
-
3
Secure Mounting: Securely fasten the unit to the panel or mounting surface using all provided mounting points. Ensure the assembly is mechanically stable and free from excessive vibration.
-
4
Connect Grounding: Connect a low-impedance protective earth (PE) ground wire to the designated chassis grounding terminal. This is critical for both safety and noise immunity.
-
5
Connect Power and I/O: Connect the AC power supply cable, followed by Ethernet, PROFIBUS, USB, and any other peripheral cables. Ensure all connectors are fully seated and secured.
-
6
Power-Up and Verification: After verifying all connections, remove LOTO and re-energize the cabinet. Power on the Box PC and confirm that the operating system boots correctly and all connected devices are recognized.