Siemens 6ES7647-7BK40-4XX0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7647-7BK40-4XX0 is a SIMATIC IPC427C Microbox PC, designed for industrial applications requiring a compact and robust computing platform. This unit features a Core 2 Duo 1.2 GHz processor with an 800 MHz FSB and 3 MB SLC, providing reliable performance for automation tasks. It is equipped with 4 GB DDR3 1066 SODIMM memory and integrates PROFIBUS DP 12 for industrial communication. The system includes an 8 GB CompactFlash drive that is accessible and replaceable, but comes without internal drive and without a pre-installed operating system, allowing for flexible configuration based on application needs.

Features

• Processor: Core 2 Duo 1.2 GHz
• Front Side Bus (FSB): 800 MHz
• Second Level Cache (SLC): 3 MB
• Industrial Communication: PROFIBUS DP 12
• Memory: 4 GB DDR3 1066 SODIMM
• Hardware Extension: Without expansions
• Accessible Drive: 8 GB CompactFlash (replaceable)
• Internal Drive: Without internal drive
• Operating System: Without operating system
• Product Phase: Phase-Out status

Applications

The Siemens SIMATIC IPC427C Microbox PC is suitable for a wide range of industrial applications, including:

• Machine control and visualization
• Data acquisition and processing
• Distributed control systems
• Industrial communication gateways
• Embedded automation solutions
• Edge computing in manufacturing environments

Technical Specifications

Installation Guidelines

1. De-energize System: Ensure all power to the installation area and associated equipment is disconnected before beginning installation.
2. Mounting: Securely mount the Microbox PC in a suitable industrial enclosure or control cabinet, ensuring adequate ventilation and clearance for cable routing.
3. Grounding: Connect the protective earth (PE) terminal of the Microbox PC to the cabinet's ground bus using a low-impedance connection to ensure proper grounding and EMC protection.
4. Power Connection: Connect the appropriate DC power supply to the designated power input terminals, observing correct polarity.
5. PROFIBUS Connection: Connect the PROFIBUS DP cable to the specified PROFIBUS interface, ensuring proper termination if it is at the end of the bus segment.
6. Peripheral Connections: Connect any required peripherals (e.g., display, keyboard, mouse) to the available interfaces.
7. Storage Media: Insert the 8 GB CompactFlash card into its accessible slot.
8. Cable Management: Route all cables to prevent strain, interference, and damage, securing them with cable ties or clips.
9. Re-energize System: After verifying all connections, restore power to the system and observe for proper operation.