Description
The Siemens 6ES7647-7BL40-0DA0 is a compact, fanless industrial computer from the SIMATIC IPC427C series, designed for demanding automation tasks. This Microbox PC is equipped with an Intel Core 2 Duo 1.2 GHz processor, 4 GB of DDR3 RAM, and a 50 GB high-endurance SATA Solid-State Drive (SSD). For industrial networking, it features an integrated 3-port PROFINET interface. The unit comes with Windows Embedded Standard 2009 pre-installed, providing a ready-to-deploy platform for control, visualization, and data acquisition applications. The storage drive is designed to be user-accessible for maintenance or replacement.
Features
- Processor: Intel Core 2 Duo at 1.2 GHz with 800 MHz FSB
- Memory: 4 GB DDR3 1066 SODIMM
- Storage: 50 GB High-Endurance SATA Solid-State Drive
- Networking: Integrated 3-port PROFINET interface
- Operating System: Windows Embedded Standard 2009 (pre-installed)
- Form Factor: Compact, fanless Microbox design
- Drive Accessibility: User-replaceable storage drive
- Expansion: This configuration has no hardware expansions
Applications
- Machine-level data processing and control
- Human-Machine Interface (HMI) visualization tasks
- Data acquisition and logging gateways
- Compact control solutions in manufacturing and process automation
Technical Specifications
| Category |
Specification |
| Processor |
Intel Core 2 Duo, 1.2 GHz, 800 MHz FSB, 3 MB SLC |
| Memory |
4 GB DDR3 1066, SODIMM |
| Storage |
50 GB Solid-State Drive (SATA), High Endurance, Replaceable |
| Networking |
PROFINET (3 Ports) |
| Operating System |
Windows Embedded Standard 2009 (Pre-installed) |
| Hardware Expansion |
Without expansions |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC IPC427C |
| Product Lifecycle Status |
Phase-Out |
| Shipping Weight |
3.25 kg |
| Package Dimensions (Calculated) |
76.0 cm x 22.0 cm x 5.0 cm |
| Commodity Code |
85371091 |
| Export Control (ECCN) |
N |
| Country of Origin |
Germany (Estimated) |
Installation Guidelines
CRITICAL WARNING: Hazardous voltages may be present. All installation and maintenance must be performed by qualified personnel with power disconnected from the control panel. Failure to comply can result in severe injury or equipment damage. Always adhere to local electrical codes and safety standards.
-
1
Ensure the control cabinet is de-energized and locked out (LOTO) before beginning installation.
-
2
Mount the Microbox PC securely onto a standard DIN rail or directly to a panel surface, ensuring adequate ventilation clearance around the unit.
-
3
Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This is critical for safety and noise immunity.
-
4
Connect the 24V DC power supply to the power input terminals, observing correct polarity. Use appropriately sized wiring for the load.
-
5
Connect shielded PROFINET cables to the RJ45 ports. Ensure cable shields are properly terminated to ground at one end to minimize EMI.
-
6
After verifying all connections are secure, remove the lockout and re-energize the cabinet to commission the device.