Siemens 6GK5774-1FY00-0TA0 SCALANCE W774-1 M12 EEC IWLAN Access Point

Description

The Siemens 6GK5774-1FY00-0TA0 is an IWLAN Access Point from the SCALANCE W774-1 M12 EEC series, designed for robust industrial wireless communication. This module features one radio and two R-SMA antenna ports, supporting iFeatures via a key plug. It operates on IEEE 802.11a/b/g/h/n wireless standards across 2.4 GHz and 5 GHz frequency bands, delivering a gross data rate of 300 Mbit/s. Connectivity includes two M12 Ethernet ports, each supporting up to 100 Mbit/s, and an integrated 2-port PoE switch. The unit is powered by a redundant 24 V DC supply via M12 A-coded connectors, offers an IP30 protection rating, and operates within a temperature range of -30 degC to 65 degC. Security protocols such as WPA2/802.11i/e are supported, and the module features conformal coating for enhanced durability in harsh environments, complying with EN 50155 standards. The CERT ID is MSN-W1-M12-E2. The scope of delivery includes manuals on CD-ROM (English/German) and M12 sealing caps, intended for operation outside of USA/Israel.

Features

• IWLAN Access Point functionality
• Single radio with two R-SMA antenna ports
• iFeatures support via key plug
• IEEE 802.11a/b/g/h/n wireless standards
• 2.4 GHz and 5 GHz frequency band operation
• Gross data rate of 300 Mbit/s
• Two M12 Ethernet ports (max. 100 Mbit/s each)
• Integrated 2-port Power over Ethernet (PoE) switch
• Redundant 24 V DC power supply
• M12 A-coded connectors
• IP30 protection rating
• Operating temperature range: -30 degC to 65 degC
• WPA2/802.11i/e security protocol support
• Conformal coating for environmental protection
• EN 50155 compliance

Applications

• Industrial Wireless LAN (IWLAN) infrastructure
• Mobile automation applications in harsh industrial environments
• Railway and transportation systems requiring robust wireless communication
• Distributed control systems needing reliable and secure wireless connectivity
• Environments benefiting from redundant power supply and integrated switching capabilities

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. Power Supply: Connect the redundant 24 V DC power supply to the M12 A-coded power input ports. Ensure correct polarity and adequate power capacity.
2. Antenna Connection: Attach compatible R-SMA antennas to the two R-SMA ports. Ensure antennas are securely fastened and positioned for optimal signal coverage.
3. Ethernet Connection: Connect M12 Ethernet cables to the two M12 ports for wired network integration. These ports support up to 100 Mbit/s and provide Power over Ethernet (PoE).
4. Mounting: Install the device in an environment suitable for its IP30 protection rating, typically within a protected enclosure or cabinet to shield against dust and moisture.
5. iFeatures Key Plug: Insert the iFeatures key plug into its designated slot if advanced functionalities are required.
6. Environmental Considerations: Ensure the operating environment remains within the specified temperature range of -30 degC to 65 degC. The conformal coating provides protection against condensation and corrosive gases.
7. National Approvals: Observe and comply with all relevant national and regional approvals for wireless device operation in the deployment location. The device is specified for operation outside of USA/Israel.

Compliance and Certifications

• EN 50155
• Observe national approvals