Siemens SIMATIC IPC 477D 6AV7240-6DD17-0HA0 Panel PC

Description

The Siemens 6AV7240-6DD17-0HA0 is a SIMATIC IPC 477D series Panel PC designed for demanding industrial automation applications. This unit integrates a high-performance computer with a 19-inch touch display, providing a robust platform for HMI, SCADA, and plant-floor data processing. It is equipped with an Intel Core i7-3517UE processor, 8 GB of RAM, and an 80 GB MLC solid-state drive for reliable and fast operation. The system comes pre-installed with Windows 7 Ultimate (64-bit) and requires a 24 V DC industrial power supply. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB interfaces, an RS-232 serial port, and a PCIe expansion slot.

Features

• Integrated 19-inch resistive touch display
• Powered by an Intel Core i7-3517UE processor
• Equipped with 8 GB of system memory
• Includes an 80 GB standard (MLC) Solid-State Drive (SSD)
• Pre-installed with Windows 7 Ultimate (64-bit) operating system
• Dual Gigabit Ethernet (10/100/1000 Mbps) ports for IE/PN connectivity
• Extensive I/O including 5 USB ports (4 rear, 1 front) and 1 RS-232 port
• Features one PCIe expansion slot for additional hardware
• Designed for a 24 V DC industrial power supply

Applications

• Human-Machine Interface (HMI) for process visualization and control
• Supervisory Control and Data Acquisition (SCADA) client terminals
• Industrial data acquisition and logging systems
• Machine vision and quality control inspection stations
• Shop-floor production monitoring and management

Technical Specifications

Installation Guidelines

1. 1 De-energize Equipment: Ensure the control cabinet or mounting location is completely de-energized before beginning installation. Verify the absence of voltage.
2. 2 Prepare Mounting Location: Verify that the panel cutout dimensions match the IPC 477D specifications. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
3. 3 Mount the Panel PC: Insert the unit into the panel cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the specified torque to ensure a proper seal.
4. 4 Connect Protective Earth (PE): Connect the PE terminal on the unit to the main protective ground of the control cabinet using a low-impedance conductor. This is a critical safety connection.
5. 5 Connect Power Supply: Connect the 24 V DC power supply to the designated power input terminals. Ensure correct polarity is observed. Use appropriately sized wiring for the load.
6. 6 Connect Peripherals: Connect Ethernet, USB, and any serial devices. Ensure all cables are properly seated and secured. Use shielded cables for communication lines where specified.
7. 7 Final Check and Power-Up: After all connections are made, re-energize the main power supply. The Panel PC should boot into the pre-installed operating system. Verify functionality before placing the system into service.