Manufacturer: Weidmuller
Product No.: IE-SW-BL06T-4POE-2SC
Country of origin:Germany
Product Type: Industrial Ethernet Switches
Payment: T/T, Western Union
Weight: 1000g
Dimensions: 50 mm x 115 mm x 70 mm
Shipping port: Xiamen
Warranty: 12 months
Facilitating reliable data distribution and power delivery in demanding industrial networks, the Weidmuller IE-SW-BL06T-4POE-2SC (part number 1504220000) functions as a robust, unmanaged Fast Ethernet switch. This unit integrates four Power over Ethernet (PoE) ports alongside two multimode fiber optic ports to bridge long-distance field communications with local IP-enabled hardware.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Weidmuller |
| Part Number | 1504220000 |
| Model Designation | IE-SW-BL06T-4POE-2SC |
| Switch Type | Unmanaged PoE |
| Transmission Rate | 100 Mbps (Fast Ethernet) |
| Transceiver Type | Multimode |
| Connector Type | SC-Duplex |
| Typical Transmission Distance | 5 km |
| Supply Voltage | 12/24/48 V DC (2 redundant inputs) |
| Inrush Current | 64.56 A at 48 V DC (0.1 to 1 ms) |
| MAC Table Size | 2 K |
| Packet Buffer Size | 768 kBit |
| Housing Material | Aluminium |
| Protection Degree | IP30 |
| Operating Temperature | -40 to 75 degC |
| Storage Temperature | -40 to 85 degC |
| Ambient Humidity | 5% to 95% (non-condensing) |
| Dimensions (W x H x D) | 50 mm x 115 mm x 70 mm |
| Net Weight | 375 g |
| Shipping Weight | 1 kg |
| Interface / Connection | Description & Pin Assignment |
|---|---|
| Ports 1 to 4 (RJ45) | 10/100BaseT(X) auto-negotiation, PoE+ power sourcing capability. |
| Ports 5 & 6 (SC-Duplex) | 100BaseFX multimode fiber optic interface for uplink/backbone connections. |
| Power Input Terminal | 1 removable 4-pin terminal block for redundant DC power inputs (V1+, V1-, V2+, V2-). |
| Grounding Screw | Chassis ground terminal located on the top panel for EMI shielding. |
The IE-SW-BL06T-4POE-2SC serves as a direct drop-in replacement for older unmanaged switches within the Weidmuller BasicLine series. When migrating from non-PoE variants (such as the standard IE-SW-BL06-2SC), ensure that the power supply rating is upgraded to accommodate the additional PoE power budget required by downstream field devices.
While the switch supports a wide input range of 12/24/48 V DC, full IEEE 802.3at/af PoE output standard compliance typically requires a stable 48 V DC input supply. Operating the switch on 12 V DC or 24 V DC inputs may limit the PoE voltage boost capability or reduce the maximum deliverable wattage per port. Always verify the total power budget of connected PDs (Powered Devices) against the available input power capacity.
To prevent communication drops caused by high electromagnetic interference (EMI) in motor control centers, ensure the chassis grounding screw is connected to the local DIN rail or functional earth using a minimum of 14 AWG copper wire. When deploying the SC-Duplex fiber ports, verify that the TX (transmit) port of the switch connects to the RX (receive) port of the remote media converter or switch.
De-energize all power sources before mounting, wiring, or servicing this equipment. High inrush currents (up to 64.56 A) can cause severe arcing if connections are made under load. Verify that the input voltage matches the specified range on the product label before applying power.
Snap the switch onto a standard TS 35 DIN rail. Ensure the DIN rail clip locks securely into place to prevent physical movement during operation.
Connect the functional earth ground wire to the grounding screw located on the top panel of the switch housing.
Wire the redundant DC power supplies to the 4-pin removable terminal block connector. Tighten the terminal screws to 0.5 Nm to prevent loose connections.
Insert the RJ45 Ethernet cables into ports 1 through 4, and connect the SC-Duplex fiber optic cables to ports 5 and 6.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Learn how Mitsubishi FX PLC STL and RET instructions structure conveyor and pneumatic sequences, with practical state design, transition logic, timeouts, diagnostics, and safe restart boundaries.
A practical guide to selecting, wiring and diagnosing DIN-style valve connectors, including form identification, coil voltage, suppression, polarity, sealing, release-time effects and commissioning...
A PLC and a microcontroller can both generate step-and-direction motion, but arc welding exposes major differences in EMC, I/O protection, diagnostics, maintainability, safety integration, and...
Piezo pneumatic valves offer low holding power and fine proportional control, but they are not universal solenoid replacements. This guide covers driver electronics, flow limits, contamination, fail...
Built-in sensor timers can reject chatter, stretch short pulses, and simplify local timing—but they do not replace PLC diagnostics or safety logic. Learn how to apply on-delay, off-delay, and...
Reversing a three-phase motor is more than swapping two leads. This guide covers phase sequence, VFD settings, reversing contactors, encoder feedback, load checks, lockout, and commissioning tests.
