Bently Nevada 21501-24-40-10-02 Proximity Vibration Probe

Apenas 5 item(ns) restante(s) em estoque

Fabricante: Bently Nevada
Nº do Produto: 21501-24-40-10-02
País de origem:Estados Unidos
Tipo de Produto: Proximity Probes
Pagamento: T/T, Western Union
Peso: 3000g
Porto de embarque: Xiamen
Garantia: 12 meses

Description

Engineered for high-accuracy shaft vibration, axial position, and rotational speed measurements on critical machinery, the Bently Nevada 21501-24-40-10-02 serves as a robust proximity vibration probe within industrial protection systems. This 5mm eddy current sensor transmits high-frequency signals to monitor dynamic motion and static position of target shafts relative to the probe tip, enabling early fault detection in rotating equipment. Designed to operate under severe temperature, pressure, and chemical exposure, it provides essential diagnostic inputs for continuous machinery health monitoring and emergency trip systems.

Features

Standard 5mm probe tip diameter optimized for applications with restricted physical clearances.
Rugged 3/8-24 UNF threaded casing constructed for extreme industrial environments.
Premium miniature male coaxial connector (Option 02) ensuring stable signal connection with minimal attenuation.
High-durability insulation and sealing to resist degradation from oils, moisture, and chemical exposure.
Direct integration with Bently Nevada Proximitor sensors for linear calibration and reliable data acquisition.

Applications

Steam, gas, and hydro turbine shaft vibration monitoring.
Centrifugal, axial, and screw compressor displacement tracking.
High-speed gearbox shaft vibration and thrust measurements.
Large electric motor and generator bearing housing monitoring.
Boiler feed pump shaft alignment and runout testing.

Technical Specifications

Manufacturer	Bently Nevada
Part Number	21501-24-40-10-02
Probe Tip Diameter	5 mm
Thread Size	3/8-24 UNF (Standard)
Unthreaded Length (Option 24)	2.4 inches
Overall Case Length (Option 40)	4.0 inches (40 tenths of an inch / approximately 102 mm)
Total Length (Option 10)	1.0 meter (3.9 inches nominal tolerance)
Connector Type (Option 02)	Miniature male coaxial connector
Measurement Type	Radial vibration, axial position, speed, and phase reference (keyphasor)
Country of Origin	United States (U.S.A.)
Shipping Weight	3.0 kg (including protective packaging)

Connections and Interfaces

Connector Component	Function
Miniature Male Coaxial Pin	Transmits high-frequency RF signal from the probe coil to the Proximitor extension cable.
Coaxial Outer Shield	Provides system ground return and EMI shielding to prevent signal corruption.

Installation Guidelines

Always use a calibrated digital voltmeter to verify output voltage gap settings during mechanical installation.
Maintain appropriate clearance between the probe tip and surrounding conductive metals to prevent side-viewing interference.
Route probe extension cabling through dedicated, grounded metal conduits to shield against electromagnetic interference.
Do not exceed the specified installation torque limits on the locknuts to prevent thread deformation or probe casing failure.

Model Number / Title	Condition	Availability	Action
Bently Nevada 330901-00-78-10-02-00 Sonda de Proximidade NSv 3300 XL	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-11-01 Sonda de Proximidade 8 mm 3300 XL	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-02-01 Sonda de Proximidade 8 mm 3300 XL	Original New	In Stock	View Details

Key Features:

#Bently Nevada 3300 #Proximity Probes

What is the primary application of the Bently Nevada 21501-24-40-10-02 probe?

It is used to measure radial dynamic vibration and axial position of rotating machinery shafts, such as turbines, compressors, and high-speed pumps.

What configuration options do the suffixes -24-40-10-02 represent?

They indicate a 2.4-inch unthreaded length (Option 24), a 4.0-inch overall case length (Option 40), a 1.0-meter total sensor length (Option 10), and a miniature male coaxial connector (Option 02).

Does this probe require a Proximitor sensor to function?

Yes, this 5mm proximity probe must be connected via an extension cable to a matching Proximitor sensor to translate the RF signal into a usable voltage output.

Envio Expresso Global

Entrega Padrão: 4-6 dias úteis via DHL, FedEx e UPS.
Despacho Expresso: Envio no mesmo dia para pedidos em estoque realizados antes das 14:00 (GMT+8).
Cobertura Mundial: Atendendo mais de 150 países, incluindo entrega rápida para Arábia Saudita e Emirados Árabes Unidos.

Devoluções e Garantia

Garantia de 30 Dias: Devoluções aceitas para produtos em estoque na embalagem original, lacrada de fábrica.
Garantia de 12 Meses: Cada componente industrial é coberto pela nossa garantia técnica profissional.

Os pedidos são processados e entregues de segunda a sexta-feira (exceto feriados).

Para elegibilidade completa, taxas de reposição e detalhes de devolução internacional, por favor, consulte nosso oficial Política de Reembolso e Devolução .

TECHNICAL SPECIFICATIONS

Country of origin

Produtos Visualizados Recentemente

Conhecimento técnico

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Atuadores Elétricos Projetados para Substituir Sistemas Hidráulicos: Um Guia Prático de Automação Industrial

Este artigo explica como os atuadores elétricos integrados, como a série e-Actuator da SMC, estão transformando o controle de movimento industrial ao substituir os sistemas pneumáticos e hidráulicos...

23 de junho de 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

Bently Nevada 21501-24-40-10-02 Proximity Vibration Probe