Bently Nevada 330101-00-40-10-02-05 3300 XL 8 mm Proximity Probe

Description

The Bently Nevada 330101-00-40-10-02-05 is a high-accuracy 8 mm proximity probe belonging to the industry-standard 3300 XL transducer series. Engineered for reliable, non-contact shaft vibration and displacement measurements in high-speed rotating machinery, this specific configuration features a 3/8-24 UNF thread, a 0.0-inch unthreaded length, a 4.0-inch overall case length, a 1.0-meter (3.3 feet) total cable length, a miniature coaxial ClickLoc connector with standard FEP-insulated cable, and hazardous area approvals (CSA, ATEX, IECEx).

Unlike other variants in the 330101 family which might have armored cables or extended unthreaded sections, the 330101-00-40-10-02-05 configuration utilizes a standard unarmored FEP-jacketed cable with a fully threaded 4.0-inch case (0.0 inches unthreaded). This makes it ideal for direct forward-mounting into bearing housings where a 4.0-inch thread reach is needed without physical interference or additional armor protection. Furthermore, it is equipped with the standard miniature ClickLoc connector and is certified for hazardous environments under major global bodies.

Features

• Rugged 8 mm tip diameter proximity probe designed for eddy-current displacement measurements.
• Molded polyphenylene sulfide (PPS) probe tip provides robust chemical, thermal, and oil resistance.
• AISI 303 or 304 stainless steel case for exceptional physical protection.
• Gold-plated brass and beryllium copper ClickLoc connector ensures reliable, tool-free locking connections.
• Completely non-contact design avoids wear and mechanical loading on rotating targets.
• Directly interchangeable with standard 3300 XL monitoring systems, 330180 series Proximitor sensors, and 3500 rack modules.

Applications

• Steam and gas turbine shaft vibration and axial displacement monitoring.
• Rotor position and displacement measurements in compressors, pumps, and fans.
• Permanent machine protection systems for high-speed rotating industrial machinery.
• Hostile machine environments requiring robust environmental seals and hazardous area certifications.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Mount the probe with the appropriate probe gap per system calibration (nominally -9 Vdc or approximately 1.27 mm / 50 mils for radial vibration applications).
• Tighten the probe case to bearing housing. The recommended installation torque is 7.5 N-m (66 in-lbf) on the first three threads, up to a maximum rated torque of 33.9 N-m (300 in-lbf).
• Maintain a minimum cable bend radius of 25.4 mm (1.0 in) for proper sensor longevity and operation.
• Ensure the coaxial ClickLoc connector is kept clean, dry, and free of oil. Direct exposure to turbine oil at the connection point is not recommended.
• Route probe cables with proper shielding and grounding practices according to Bently Nevada drawings 140979 or 141092.

Compliance and Certifications

• Approvals: CSA, ATEX, IECEx
• Hazardous Area Classification: Ex ia IIC T5...T1 Ga (for EPL Ga and Gc), Ex ia IIIC T90 degC...T280 degC Dc (for EPL Dc)
• Non-Incendive Classification: Ex nA IIC T5...T1 Gc, Ex ec IIC T5...T1 Gc
• Entity Parameters: Ui = -28 V, Ii = 140 mA, Pi = 0.91 W, Ci = 1.5 nF, Li = 610 uH
• CE and FCC Compliant