Bently Nevada 330709-000-090-10-02-00 3300 XL 11 mm Proximity Probe

Description

Unthreaded metric M16 x 1.5 steel probe body (Option 000) with a 90 mm overall case length (Option 090) and a 1.0 m total length (Option 10) specifies this 330709-000-090-10-02-00 configuration, a non-contacting 3300 XL 11 mm proximity probe.

This metric configuration features an M16 x 1.5 thread without protective armor, making it suitable for direct installation in threaded machine casings where physical conduit armor is not required. It employs standard FEP insulated triaxial cable rather than FluidLoc option variants, and is configured without optional hazardous area certifications (Option 00) for standard non-certified environments.

Features

• M16 x 1.5 metric thread style without armor
• 0 mm unthreaded length (Option 000) and 90 mm overall case length (Option 090)
• 1.0 meter (3.3 feet) total cable length (Option 10)
• Miniature coaxial ClickLoc connector (Option 02) with standard cable
• 11 mm tip diameter providing a 4.0 mm (160 mil) linear range
• 3.94 V/mm (100 mV/mil) incremental scale factor output
• Polyphenylene sulfide (PPS) tip material and AISI 304 stainless steel probe case
• Operating temperature range of -52 degC to +177 degC (-62 degF to +351 degF)

Applications

• Turbine and compressor shaft axial (thrust) position measurements
• Ramp differential expansion measurements on steam turbines
• Rod position or rod drop measurements on reciprocating compressors
• Tachometer, zero speed, and Keyphasor phase reference measurements
• Rotating machinery protection systems in standard industrial environments

Ordering Information

Technical Specifications

Installation Guidelines

Position the probe tip at the recommended gap setting of 2.5 mm (100 mils) from the target surface for optimum linear operation. When mounting, do not exceed the maximum rated case torque of 63.3 N-m (560 in-lb); the recommended installation torque is 21.1 N-m (187 in-lb) to prevent damage to the M16 x 1.5 metric threads. Ensure that all ClickLoc connections are kept clean and free from fluids. Finger-tighten the coaxial connectors, ensuring you do not exceed the maximum allowable torque of 0.565 N-m (5 in-lb). Maintain a minimum cable bend radius of 25.4 mm (1.0 in) along the entire run of the triaxial FEP insulated cable.

Compliance and Certifications

This configuration meets general product standards including the CE Mark (EMC Directive 2014/30/EU: EN 61000-6-2, EN 61000-6-4) and RoHS Directive 2011/65/EU. Under Agency Approval Option 00, specialized hazardous area approvals are not required or provided.