Bently Nevada 3500/22-01-01-02 3500 Series Transient Data Interface

Description

Engineered as the primary communication gateway for the 3500 Series Machinery Protection System, the 3500/22-01-01-02 transient data interface serves as the critical bridge between physical rack hardware and machinery management software. This module continuously collects static and dynamic data from integrated vibration, position, and temperature monitors, processing high-speed transient waveforms during machine startup, shutdown, and steady-state operations.

The 3500/22-01-01-02 configuration features a standard TDI type paired with a high-performance 10Base-T/100Base-TX Ethernet interface, enabling direct network communication with System 1 asset management software. By collecting both configuration parameters and dynamic trend data, this interface ensures plant operators receive real-time mechanical health diagnostics across critical rotating assets.

Features

• Provides continuous static and dynamic transient waveform data capture for in-depth vibration analysis.
• Features high-speed 10Base-T/100Base-TX Ethernet I/O capabilities for reliable network connectivity.
• Equipped with a dedicated front-panel USB port for local configuration, setup, and diagnostics.
• Supports full system configuration and diagnostics through direct interface with Bently Nevada rack configuration software.
• Maintains a localized database of historic dynamic data to ensure sequence of events and alarm verification.
• Fully hot-swappable design, enabling module insertion or removal without interrupting ongoing rack monitoring.

Applications

• Steam and gas turbine vibration and performance monitoring.
• Centrifugal and reciprocating compressor mechanical diagnostics.
• Heavy industrial rotating machinery protection in oil, gas, and petrochemical facilities.
• Hydroelectric and thermal power generation plant asset monitoring.
• Large-scale water treatment pumping systems and cooling tower fans.

Ordering Information

Technical Specifications

Installation Guidelines

The 3500/22-01-01-02 must be installed in the first slot (left-hand side, directly adjacent to the power supplies) of the 3500 rack. Ensure the rack chassis is properly grounded before sliding the TDI module and its matching I/O module into the rear slot. Shielded twisted-pair (STP) Category 5e or Category 6 cabling is required for Ethernet connections to minimize electromagnetic interference. Always verify power supply constraints and structural tightness using the integrated retaining screws on the front and rear faceplates.