Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC

Only 4 item(s) left in stock

Manufacturer: Siemens
Product No.: 6AV7240-4DL34-1PA0
Country of origin:Alemanha
Product Type: Industrial PCs
Barcode: 85371098
Payment: T/T, Western Union
Weight: 7680g
Dimensions: 50 x 40 x 20 cm
Shipping port: Xiamen
Warranty: 12 months

Description

The Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC is a fanless industrial computing platform designed for continuous operation in harsh environments. It integrates a 19-inch resistive touch display with a 4:3 aspect ratio, powered by an Intel Core i3-3217UE processor. The unit provides 4 GB of RAM with integrated NVRAM and an 80 GB MLC SSD for data integrity. Pre-installed with Windows Embedded Standard 7 and licensed for WINAC RTX 2010 and WINCC RT Advanced, it serves as a dedicated controller and visualization terminal for distributed control systems.

Features

Fanless cooling design for maintenance-free operation
19-inch XGA TFT display with analog resistive touch
Intel Core i3-3217UE processor, 1.6 GHz
4 GB DDR3 RAM with integrated NVRAM backup
80 GB Solid State Drive (Multi-Level Cell)
PROFIBUS DP 12 Mbps master interface
Dual Gigabit Ethernet (IE/PN) ports
RS-232 serial interface for legacy device integration
Four rear USB 2.0 ports, one front USB 2.0 port
24 V DC industrial power supply input

Applications

Machine-level Human Machine Interface (HMI)
Distributed Control System (DCS) operator stations
PC-based soft PLC control (WINAC RTX)
Data acquisition and recipe management
Manufacturing Execution System (MES) clients
Building automation control panels

Ordering Information

Model	Description
6AV7240-4DL34-1PA0	SIMATIC IPC 477D, 19" Touch, Core i3, 4GB RAM, 80GB SSD, Win Emb Std 7, WinAC RTX 2010, WinCC RT Adv V13/V15

Technical Specifications

Category	Parameter	Specification
General	Manufacturer	Siemens
	Country of Origin	Germany
	Product Type	Industrial Panel PC
	Net Weight	6.40 kg
	Shipping Weight (Calculated)	7.68 kg
Display & Computing	Display Size	19 inches
	Resolution	XGA 1280 x 1024 pixels
	Processor	Intel Core i3-3217UE, 1.6 GHz
	Memory	4 GB DDR3 with NVRAM
	Storage	80 GB SSD (MLC)
	Expansion	No PCIe slots
Software	Operating System	Windows Embedded Standard 7 (32-bit)
	Soft PLC	WINAC RTX 2010 SP2
	HMI Runtime	WINCC RT Advanced V13 SP1 (2048 PowerTags)
	HMI License	WINCC RT Advanced V15 Package
Interfaces	Ethernet	2 x 10/100/1000 Mbps (IE/PN)
	Fieldbus	PROFIBUS DP 12 Mbps Master
	Serial	1 x RS-232
	USB	4 x Rear, 1 x Front (USB 2.0)
	Power Input	24 V DC
Logistics	Commodity Code	85371098
Logistics	Package Dimensions (Calculated)	500 mm x 400 mm x 200 mm

Connections and Interfaces

Connector / Port	Function / Assignment
RJ45 (x2)	Gigabit Ethernet (PROFINET / Industrial Ethernet)
DB9 Female	RS-232 Serial Communication
SUB-D 9-pin Male	PROFIBUS DP 12 Mbps Interface
USB Type A (x5)	Peripheral Connection (Keyboard, Mouse, Storage)
M12 Power Connector	24 V DC Supply Input

Installation Guidelines

CRITICAL WARNING

De-energize all connected control circuits before mounting or servicing. Capacitors within the IPC retain charge after power removal. Disconnect 24 V DC supply and wait 60 seconds before handling connectors. Failure to observe electrostatic discharge (ESD) precautions will result in permanent hardware damage.

1 Verify panel cutout dimensions match the 19-inch format. Ensure rear clearance of at least 100 mm for cable bending radius and heat dissipation.

2 Connect the 24 V DC power line using appropriately sized ferrules. Torque M4 terminal screws to 0.8 N-m. Reverse polarity protection is active, but incorrect wiring may trigger internal fuses.

3 Ground the chassis via the PE (Protective Earth) terminal on the power connector. Use a copper conductor with minimum cross-section of 2.5 mm². Do not rely solely on DIN rail grounding for EMC compliance.

4 For PROFIBUS DP termination, activate the built-in terminating resistor via DIP switch if the unit is the last node on the bus segment. Set the PROFIBUS address via hardware DIP switches prior to applying power.

Key Features:

#Panel PCs #SIMATIC IPC 477D

O software STEP 5 é compatível com este dispositivo?

Não. O dispositivo roda Windows 7 Ultimate 64 bits, que é incompatível com o STEP 5. Ele suporta STEP7 Professional e STEP 7 Micro/WIN V4.0.

Qual é a finalidade do cabo MPI incluído?

O cabo MPI conecta o Field PG à interface MPI/DP dos CLPs SIMATIC S7-300 ou S7-400 para programação e diagnóstico.

A memória RAM pode ser atualizada além de 16 GB?

Não. O sistema está configurado com dois módulos de 8 GB ocupando ambos os slots disponíveis. O chipset suporta no máximo 16 GB.

O dispositivo inclui uma interface S5-EPROMMER?

Não. Este modelo Premium Plus está configurado sem a interface S5 e a funcionalidade S5-EPROMMER.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Color pattern	Branco Acinzentado
Country of origin	Alemanha

Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC