Siemens 6AV7612-0AB10-0BJ0 SIMATIC Panel PC 670 Panel PC

Apenas 7 item(ns) restante(s) em estoque

Fabricante: Siemens
Nº do Produto: 6AV7612-0AB10-0BJ0
País de origem:Alemanha
Tipo de Produto: Panel PC
Código de barras: 85371091
Pagamento: T/T, Western Union
Peso: 12g
Dimensões: 35.0 x 25.0 x 25.0 cm
Porto de embarque: Xiamen
Garantia: 12 meses

Description

This is a Siemens 6AV7612-0AB10-0BJ0, a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) applications. This standard configuration unit features a 12-inch TFT touch display, a Celeron 300 MHz CPU, 64 Mbyte of RAM, and a 20 GB hard drive with an integrated CD-ROM. It is pre-installed with the Windows NT 4.0 English operating system and is configured for a 115-230V AC power supply, including a U.S. mains cable. Note that this product is considered obsolete in the manufacturer's lifecycle.

Features

12-inch TFT color touch display for operator control and visualization.
Powered by a Celeron 300 MHz processor.
Equipped with 64 Mbyte of system RAM.
Includes a 20 GB hard disk drive for data and application storage.
Features an integrated CD-ROM drive.
Pre-loaded with Microsoft Windows NT 4.0 (English).
Supports a wide input voltage range of 115-230V AC.

Applications

Machine-level operator control and monitoring
Process visualization and data logging
Factory floor information systems
Integration into control cabinets and operator consoles

Technical Specifications

Specification	Value
Product Type	Panel PC
Series	SIMATIC Panel PC 670
Display	12-inch TFT Touch Display
Processor (CPU)	Celeron 300 MHz
Memory (RAM)	64 Mbyte
Storage	20 GB Hard Drive, CD-ROM
Operating System	Windows NT 4.0 (English)
Power Supply	115-230V AC (Includes U.S. Mains Cable)
Product Lifecycle Phase	Obsolete
Commodity Code	85371091
Export Control (ECCN)	N
Manufacturer	Siemens
Country of Origin	Germany (Estimated)
Shipping Weight (Source)	12.00 kg
Package Dimensions (Source)	35.0 x 25.0 x 25.0 cm

Installation Guidelines

CRITICAL WARNING: Electrical Hazard. Installation must be performed by qualified personnel only. Failure to de-energize equipment before installation can result in severe injury or death. Always follow local Lockout/Tagout (LOTO) procedures.

1
De-energize Equipment: Before beginning installation, disconnect and lock out all power sources to the control cabinet or panel where the unit will be installed. Verify the absence of voltage.
2
Prepare Panel Cutout: Ensure the panel cutout dimensions match the requirements for the Panel PC 670. Clean the mounting surface to ensure a proper seal and secure fit.
3
Mount the Unit: Insert the Panel PC into the cutout from the front of the panel. Secure it from the rear using the provided mounting clamps, tightening them evenly to the specified torque to ensure a uniform seal.
4
Connect Cabling: Connect the main power cable to a properly rated and protected power source. Connect the protective earth (PE) terminal to the cabinet's ground bus. Connect any required communication or I/O cables.
5
Final Checks and Power-Up: Double-check all connections for security. Remove LOTO devices and restore power to the cabinet. The Panel PC should boot into its operating system. Verify display and touch functionality.

Key Features:

#Panel PC #SIMATIC Panel PC

What are the display specifications for the 6AV7612-0AB10-0BJ0?

This unit is equipped with a 12-inch TFT touch display for operator interaction and process visualization.

What operating system is installed on this Panel PC?

The 6AV7612-0AB10-0BJ0 comes pre-installed with the English version of Microsoft Windows NT 4.0.

What are the CPU and RAM specifications?

This model features a Celeron 300 MHz processor and is configured with 64 Mbytes of RAM.

What is the required input power for this device?

The Panel PC supports a power supply of 115-230V AC. The package includes a U.S. standard mains cable.

Is the 6AV7612-0AB10-0BJ0 a current product?

No, this product is classified as 'Obsolete' in the Siemens product lifecycle. It is typically sourced as a spare part for existing systems.

Envio Expresso Global

Entrega Padrão: 4-6 dias úteis via DHL, FedEx e UPS.
Despacho Expresso: Envio no mesmo dia para pedidos em estoque realizados antes das 14:00 (GMT+8).
Cobertura Mundial: Atendendo mais de 150 países, incluindo entrega rápida para Arábia Saudita e Emirados Árabes Unidos.

Devoluções e Garantia

Garantia de 30 Dias: Devoluções aceitas para produtos em estoque na embalagem original, lacrada de fábrica.
Garantia de 12 Meses: Cada componente industrial é coberto pela nossa garantia técnica profissional.

Os pedidos são processados e entregues de segunda a sexta-feira (exceto feriados).

Para elegibilidade completa, taxas de reabastecimento e detalhes de devolução internacional, por favor, consulte nosso oficial Política de Reembolso e Devolução .