Siemens 6ES7675-1DA20-0AA0 SIMATIC IPC427C PC Microbox

Description

The Siemens 6ES7675-1DA20-0AA0 is a SIMATIC IPC427C PC Microbox bundle designed for industrial applications, serving as a WinCC V7.0 Client. This compact industrial PC features an Intel Celeron M 1.2 GHz processor, 1 GByte RAM, and robust connectivity options including two 10/100 Mbit/s Ethernet RJ45 ports, four USB ports, and one serial (COM1) port. It includes a slot for a Compact Flash drive and comes with an internal 4 GByte CF card. The unit is preinstalled with Windows Embedded Standard 2009 and WinCC RT V7.0 SP2, UPD1, along with a license for WinCC RT V7.0, 128PT. Note that it may be delivered without embedded Windows software depending on the specific configuration.

Features

• Intel Celeron M 1.2 GHz Processor
• 1 GByte RAM
• Dual 10/100 Mbit/s Ethernet RJ45 Ports
• Four USB Ports
• One Serial (COM1) Port
• Integrated Compact Flash Drive Slot
• Internal 4 GByte Compact Flash Card
• Preinstalled Windows Embedded Standard 2009
• Preinstalled WinCC RT V7.0 SP2, UPD1
• WinCC RT V7.0, 128PT License Included

Applications

The SIMATIC IPC427C PC Microbox is suitable for a range of industrial automation tasks, including:

• Human Machine Interface (HMI) client applications
• Process visualization and control
• Data acquisition and logging
• Embedded control systems
• Distributed automation architectures

Technical Specifications

Connections / Interfaces

• Ethernet: 2 x RJ45 ports for 10/100 Mbit/s network connectivity.
• USB: 4 x USB ports for peripheral device connection.
• Serial: 1 x COM1 port for serial communication.
• Compact Flash: 1 x slot for Compact Flash memory cards.

Installation Guidelines

1. De-energize System: Ensure all power to the installation area and associated equipment is completely disconnected and locked out before beginning installation.
2. Mounting: Securely mount the PC Microbox in a suitable industrial enclosure or control cabinet, ensuring adequate ventilation and clearance for cable routing and heat dissipation.
3. Power Connection: Connect the appropriate power supply to the unit, observing correct polarity and voltage requirements.
4. Ethernet Connection: Connect Ethernet cables to the RJ45 ports for network communication with other automation components or the control network.
5. USB Peripherals: Connect any required USB peripherals such such as keyboards, mice, or external storage devices to the available USB ports.
6. Serial Devices: If necessary, connect serial devices to the COM1 port using appropriate cabling.
7. Compact Flash: Insert the Compact Flash card into its designated slot.
8. Grounding: Ensure the unit is properly grounded to the control cabinet's protective earth to prevent electrical interference and ensure safety.
9. Cable Management: Route all cables neatly and securely, avoiding sharp bends or proximity to sources of electromagnetic interference.
10. Power Up: After verifying all connections, re-energize the system and observe the unit's startup sequence.