1 из 3

ABB TC625 3BSE002224R1 Advant Master AF100 Coaxial Modem

ABB TC625 3BSE002224R1 Advant Master AF100 Coaxial Modem

Остался только 8 товар(ы) на складе
  • Производитель: ABB

  • Номер продукта: 3BSE002224R1

  • Страна происхождения:Швеция

  • Тип продукта: Coaxial Modem

  • Штрихкод: 85176200

  • Оплата: Т/Т, Western Union

  • Вес: 290г

  • Размеры: 4.4 cm x 15 cm x 17.6 cm

  • Порт отгрузки: Сямынь

  • Гарантия: 12 месяцев

Количество
Просмотреть полные детали

The ABB TC625 is a hardware infrastructure interface module designed for the Advant Master Process Control System to manage deterministic data transportation across coaxial physical segments. This specialized communication link executes media translation protocols, working under product ID 3BSE002224R1 and Type Designation TC625, to bridge processing networks over Advant Fieldbus 100 (AF100) configurations. Engineered without internal cooling fans, this device drives electrical signals along high-integrity coaxial networks to sustain zero-packet-loss routing within centralized plant grids. The unit is optimized for multi-node automation topologies, protecting time-critical application loops from physical signal degradation while supporting full compatibility with core communication backplanes and dedicated transceiver sets.

Key Features

  • Direct translation architecture optimizing raw signal conversion on active AF100 industrial fieldbuses.
  • Exempted from 2011/65/EU RoHS scope per specialized heavy industry system provisions.
  • Exchange component configuration matching exact factory cross-references under code EXC3BSE002224R1.
  • Rugged modular casing built to slot securely into dedicated industrial sub-rack tracks.

Target Deployment

  • Advant Controller 450 Version 2.3 logic sub-racks running complex process control topologies.
  • Advant Controller 410 Version 1.5 installations requiring expanded remote node networking.
  • System 800xA control infrastructure utilizing active Advant Fieldbus 100 interface blocks.

System Compatibility Kit

This un-bundled modem component integrates natively into standard corporate system kits and designated transceiver layouts:

Kit Identifier Kit Component Nomenclature Qty Unit
3BSE014070R1 AF 100 Communication set 1 piece
3BSE018448R1 CI522AK01 AF 100 Comm. Interface 1 piece
3BSE018449R1 CI522AK02 AF 100 Interface for Bus 1 piece
3BSE018450R1 CI522AK03 AF 100 Interface for Bus 1 piece

Technical Specifications

Parameter Certified Engineering Data
Manufacturer ABB
Product Type Communication_Module
Sub-Category TC625 Advant Fieldbus 100 Coaxial Modem
Alternative Cross-Reference ID EXC3BSE002224R1
Customs Tariff Number 85176200
HS Code Description Machines for the reception, conversion and transmission or regeneration of voice, images or other data
Product Net Weight 0.29 kg
Country of Origin Sweden
Shipping Weight (Calculated) 0.48 kg
Package Dimensions (Calculated) 245 mm x 160 mm x 60 mm

Field Installation Protocol

Follow precise sequence parameters to mount or swap out infrastructure interfaces safely on system sub-racks.

Critical Warning: Network Segregation & Zero-Energy State
Isolate auxiliary and main power feeds from the target Advant Controller rack prior to module insertion or removal. Handling coax field modems under active current risks dangerous transient signal reflection, hardware register lockup, or unexpected breakdown of adjacent communication loops.
1
Sub-Rack Power Isolation & ESD Grounding Completely isolate the sub-rack power supply module (such as the SA16x setup). Wear a grounded ESD wrist strap connected to the cabinet frame before unpacking the replacement unit to protect the sensitive hardware registers from static discharge.
2
Hardware Address & Jumpers Verification Before inserting the card, inspect the onboard hardwired jumper links (e.g., S1/S2 positions) against the original plant loop layout documentation. Ensure the hardware identification settings precisely match your existing Advant Controller node scheme.
3
Module Alignment, Seating & Mechanical Earthing Align the TC625 PCB edges accurately within the upper and lower plastic channel tracks of the sub-rack. Smoothly push the module back until its DIN connector fully mates with the system backplane. Securely torque the top and bottom captive screws to establish proper mechanical chassis earthing.
4
Coaxial Bus Termination & BNC Locking Connect the heavy industrial RG-6 or RG-11 coaxial physical drop segments using the dedicated BNC T-connectors. Twist the locking sleeves until fully clicked into place to shield against industrial EMI. If this modem serves as the physical endpoint of the AF100 bus topology, verify that a certified 75Ω coaxial termination resistor is securely installed on the vacant side of the BNC tee.

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

Technical Datasheet

ABB TC625 3BSE002224R1 Advant Master AF100 Coaxial Modem

正在加载 PDF,请稍候…

Which fieldbus architecture does this device interface with?

This module interfaces directly with Advant Fieldbus 100 networks to drive deterministic data via coaxial distribution mediums.

Is this component compliant with standard RoHS directive timelines?

No. The device is officially exempted from the scope of directive 2011/65/EU under standard provisions for specialized process control system hardware.

Can I replace an active unit without shutting down power to the rack?

No. Power feeds to the specific Advant Controller sub-rack section must be fully isolated before removal or installation to prevent signal reflection.

Глобальная экспресс-доставка

  • Стандартная доставка: 4-6 рабочих дней через DHL, FedEx и UPS.
  • Экспресс-отправка: Отправка в тот же день для заказов со склада, сделанных до 14:00 (GMT+8).
  • Мировое покрытие: Обслуживаем более 150 стран, включая быструю доставку в Саудовскую Аравию и ОАЭ.

Возвраты и гарантия

  • 30-дневная гарантия: Принимаются возвраты товаров со склада в оригинальной, заводской запечатанной упаковке.
  • 12-месячная гарантия: Каждый промышленный компонент поддерживается нашей профессиональной технической гарантией.

Заказы обрабатываются и доставляются с понедельника по пятницу (кроме государственных праздников).


Для полной информации о праве на возврат, сборах за пополнение запасов и международных возвратах, пожалуйста, ознакомьтесь с нашим официальным Политика возврата и возврата средств .

TECHNICAL SPECIFICATIONS

Color pattern
Серовато-белый Серебро
Connection type
Coaxial
Country of origin
Швеция
Power source
Постоянный ток (DC)

Недавно просмотренные товары

Технические знания

Руководство по роботизированным захватам: от деликатного обращения до тяжелой автоматизации

Современные роботизированные захваты развиваются дальше традиционных механических челюстей. От клеевых систем, вдохновленных гекконами, и мягких захватов пищевого класса до инструментов на базе ИИ...

Воспоминание: как ранние электродвигатели изменили подземную добычу полезных ископаемых

От компрессоров с приводом от каната до аккумуляторных вагонеток — ранние горные работы стали поворотным моментом в индустриальной электрификации. В этой статье рассматривается, как электродвигатели...

Factory I/O: современный инструмент моделирования ПЛК для обучения промышленной автоматизации

Factory I/O меняет обучение ПЛК, предоставляя погружающие 3D промышленные симуляции для студентов, инженеров и команд технического обслуживания. Платформа сокращает разрыв между теорией и практикой...

Программирование циклов одноосевого движения на сервоприводе CMZ

В этом руководстве рассматривается, как встроенный ПЛК внутри серводрайвера CMZ SBD может выполнять автономные программы движения, включая логику поиска нуля, позиционное управление и циклическое...

Настройка управления движением по одной оси с сервоприводами CMZ

В этом руководстве рассматривается ввод в эксплуатацию сервоприводной системы с одной осью на базе привода CMZ SBD, включая настройку оборудования, масштабирование оси, конфигурацию возврата в...

Интеграция ПЛК Mitsubishi FX с частотным преобразователем FR-D700 и управлением через HMI

В этом руководстве объясняется, как ПЛК Mitsubishi FX интегрируются с частотными преобразователями FR-D700 и панелями HMI для управления двигателем в прямом и обратном направлениях. Рассматриваются...