BECKHOFF FC5121 CANopen Master/Slave Card

Остался только 10 товар(ы) на складе

Производитель: BECKHOFF
Номер продукта: FC5121
Страна происхождения:Германия
Тип продукта: Fieldbus Cards
Оплата: Т/Т, Western Union
Вес: 500г
Размеры: appro x . 100 mm x 130 mm
Порт отгрузки: Сямынь
Гарантия: 12 месяцев

Description

Integrating PC-based control systems directly with CANopen fieldbus networks, the Beckhoff FC5121 interface card provides a high-performance PCI Express (PCIe) connection for demanding industrial automation environments. This single-channel CANopen master/slave card enables seamless communication between industrial PCs and distributed I/O, drives, or other CANopen-compliant field devices. Operating within the TwinCAT software environment, the module supports both master and slave configurations, offering flexible integration into diverse control architectures without compromising processing speed.

Features

Single-channel CANopen interface designed for standard PCI Express x1 slots.
Supports adjustable data transfer rates ranging from 10 kbaud up to 1000 kbaud.
Galvanically decoupled 9-pin D-sub connection to protect host hardware from voltage spikes.
Integrated, switchable termination resistor for simplified network topology configuration.
Onboard hardware diagnostics via dual LED indicators per channel for rapid status monitoring.
Process image capacity of up to 4 kbytes total input and output data.

Applications

Industrial PC-based automation and control systems.
Distributed I/O and motion control integration in manufacturing lines.
Machine building and factory automation systems requiring CANopen connectivity.
Test benches and real-time simulation environments.

Technical Specifications

Manufacturer	BECKHOFF
Part Number/Model	FC5121
Fieldbus Type	CANopen
PC Interface	PCI Express x1 (PCIe x1)
Number of Channels	1
Data Transfer Rates	10, 20, 50, 100, 125, 250, 500, 800, 1000 kbaud
Bus Interface	1 x D-sub socket, 9-pin, galvanically decoupled
Termination Resistor	Switchable (onboard)
Hardware Diagnostics	2 LEDs per channel
Process Image Bit Width	Max. 4 kbyte input and output data (total)
Operating Temperature	0 to +55 degC
Software Driver	TwinCAT 2.11 R3 and higher
Dimensions	Approx. 100 mm x 130 mm

Connections and Interfaces

Connector Pin	Function / Signal
Pin 2	CAN_L (CAN low bus line)
Pin 3	CAN_GND (CAN ground)
Pin 7	CAN_H (CAN high bus line)
Pin 9	CAN_V+ (Optional external positive supply)
Pins 1, 4, 5, 6, 8	NC (Not connected / Reserved)

Installation Guidelines

Ensure the Industrial PC is completely powered down and disconnected from the main power supply before inserting the card.
Insert the card firmly into a free PCI Express x1 (or higher) slot and secure the bracket to the PC chassis.
Configure the switchable termination resistor depending on the card's position in the CANopen network topology (enable if the card is at the physical end of the bus line).
Use shielded twisted-pair cabling compliant with CANopen standards to minimize electromagnetic interference.
Ground the cable shield at both ends where possible, or according to local electromagnetic compatibility (EMC) guidelines.

Compliance and Certifications

Key Features:

Does the Beckhoff FC5121 support both master and slave modes?

Yes, the FC5121 can be configured as either a CANopen master or a CANopen slave within the TwinCAT environment.

What PC interface slot is required for the FC5121?

The card requires a standard PCI Express (PCIe) x1 slot, but it can also be installed in x4, x8, or x16 PCIe slots.

Is there an integrated termination resistor on the FC5121?

Yes, the card features an onboard, switchable termination resistor that can be enabled or disabled via a physical switch on the card.

Глобальная экспресс-доставка

Стандартная доставка: 4-6 рабочих дней через DHL, FedEx и UPS.
Экспресс-отправка: Отправка в тот же день для заказов со склада, сделанных до 14:00 (GMT+8).
Мировое покрытие: Обслуживаем более 150 стран, включая быструю доставку в Саудовскую Аравию и ОАЭ.

Возвраты и гарантия

30-дневная гарантия: Принимаются возвраты товаров со склада в оригинальной, заводской запечатанной упаковке.
12-месячная гарантия: Каждый промышленный компонент поддерживается нашей профессиональной технической гарантией.

Заказы обрабатываются и доставляются с понедельника по пятницу (кроме государственных праздников).

Для полной информации о праве на возврат, сборах за пополнение запасов и международных возвратах, пожалуйста, ознакомьтесь с нашим официальным Политика возврата и возврата средств .

TECHNICAL SPECIFICATIONS

Country of origin

BECKHOFF FC5121 CANopen Master/Slave Card