1 из 3

Bently Nevada 330103-02-07-10-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330103-02-07-10-02-00 3300 XL 8 mm Proximity Probe

Остался только 2 товар(ы) на складе
  • Производитель: Bently Nevada

  • Номер продукта: 330103-02-07-10-02-00

  • Страна происхождения:Соединённые Штаты

  • Тип продукта: 3300 XL 8 mm Proximity Probe

  • Штрихкод: 8537101190

  • Оплата: Банковский перевод (T/T), Western Union

  • Вес: 140г

  • Размеры: 150 mm x 150 mm x 40 mm (H x W x D)

  • Порт отправления: Сямынь

  • Гарантия: 12 месяцев

Количество
Просмотреть полные детали

Description

330103-02-07-10-02-00 specifies a metric thread, unarmored 3300 XL 8 mm proximity probe used for non-contact machinery displacement measurements. This specific configuration features a metric M10 x 1 thread body without mechanical protective armor, an unthreaded length of 20 mm (Option 02), and an overall case length of 70 mm (Option 07).

With a total length of 1.0 meter (Option 10) and a miniature ClickLoc coaxial connector on standard FEP insulated cable (Option 02), this probe connects directly to a 3300 XL extension cable and Proximitor sensor. Since it features the Option 00 agency approval code, it is intended for general-purpose environments where hazardous area certifications are not required, differentiating it from Option 05 variants.

Features

  • Metric M10 x 1 thread body with a standard 8.0 mm tip diameter.
  • Option 02 specifies a 20 mm unthreaded section for depth adjustments.
  • Option 07 provides a 70 mm case length constructed from corrosion-resistant AISI 303 or 304 stainless steel.
  • Option 10 delivers a 1.0 meter total probe length for direct connection to extension cables.
  • Option 02 supplies a standard triaxial FEP insulated cable terminated with a miniature coaxial ClickLoc connector.
  • Option 00 designates a general-purpose configuration without agency approvals.
  • Polyphenylene sulfide (PPS) probe tip is rated for demanding machinery environments.

Applications

  • Shaft vibration and axial position measurement on high-speed rotating equipment.
  • Machinery protection monitoring on industrial steam turbines, gas turbines, and compressors.
  • Fluid-film bearing clearance and shaft dynamic motion analysis.
  • Integration with Bently Nevada 3500 and 3300 monitoring systems.

Ordering Information

Option Segment Code on This SKU Description / Meaning
Orderable Part Number 330103-02-07-10-02-00 3300 XL 8 mm Proximity Probe, M10 x 1 thread, without armor
A - Unthreaded Length 02 20 mm unthreaded length (increments of 10 mm)
B - Overall Case Length 07 70 mm case length (increments of 10 mm)
C - Total Length 10 1.0 meter (3.3 feet) total length
D - Connector and Cable 02 Miniature coaxial ClickLoc connector, standard cable
E - Agency Approval 00 Not required / No certifications

Technical Specifications

Manufacturer Bently Nevada (Baker Hughes)
Part Number / Model 330103-02-07-10-02-00
Product Type 3300 XL 8 mm Proximity Probe (Metric)
Thread Size M10 x 1 (metric)
Armor Without mechanical protective armor
Unthreaded Length 20 mm
Case Length 70 mm
Total Length 1.0 meter (3.3 feet)
Connector Type Miniature coaxial ClickLoc (male)
Cable Type 75 ohm triaxial standard cable
Cable Insulation Fluorinated ethylene propylene (FEP)
Probe Tip Material Polyphenylene sulfide (PPS)
Probe Case Material AISI 303 or 304 stainless steel
Linear Range 2.0 mm (80 mils), from approximately 0.25 mm (10 mils) to 2.3 mm (90 mils)
Nominal Scale Factor (ISF) 7.87 V/mm (200 mV/mil)
Probe Temperature Range -52 degC to +177 degC (-62 degF to +350 degF) operating and storage
Pressure Seal Limit Compatible with differential pressure sealing applications (above -34 degC)
Tensile Strength 330 N (75 lbf) maximum rated (probe case to lead)
Minimum Bend Radius 25.4 mm (1.0 in)
Dimensions 150 mm x 150 mm x 40 mm (H x W x D)
Weight 0.14 kg

Installation Guidelines

  • Ensure that probe casing thread is clean and undamaged prior to installation.
  • Do not exceed the maximum rated installation torque of 22.6 N-m (200 in-lbf) for standard probe cases.
  • Ensure the cable bend radius does not drop below 25.4 mm (1.0 in) during routing.
  • Verify that the physical gap setting is adjusted to approximately -9 Vdc at the center of the linear range.
  • Ensure connection points are clean and secured finger-tight.

Compliance and Certifications

  • RoHS compliant.
  • Option 00 general-purpose configuration: certified hazardous area approvals are not required.
Loading product navigation…

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

Technical Datasheet

Bently Nevada 330103-02-07-10-02-00 3300 XL 8 mm Proximity Probe

What is the thread type and size for the 330103-02-07-10-02-00 proximity probe?

This probe features a metric M10 x 1 thread body, distinct from the standard fractional 3/8-24 UNF threads used on 330101 and 330102 variants.

What do the option codes 02 and 07 represent on this probe?

Option 02 specifies a 20 mm unthreaded length, while Option 07 indicates a 70 mm overall case length. The unthreaded length is designed to be at least 20 mm less than the case length.

Does this 330103 configuration include armor or special chemical protection?

No. This specific configuration is unarmored (without armor) and uses a standard 75 ohm triaxial FEP insulated cable with a miniature coaxial ClickLoc connector.

Which monitoring systems is this probe compatible with?

It is compatible with the Bently Nevada 3300 XL 8 mm Proximity Transducer System, including standard 3300 XL Proximitor sensors and extension cables.

Does the 330103-02-07-10-02-00 configuration carry hazardous area certifications?

This variant has the Option 00 agency approval code, meaning certifications are not required. For ATEX, IECEx, or CSA approved installations, look for Option 05 configurations.

Глобальная экспресс-доставка

  • Стандартная доставка: 4-6 рабочих дней через DHL, FedEx и UPS.
  • Экспресс-отправка: Отправка в тот же день для заказов со склада, оформленных до 14:00 (GMT+8).
  • Мировое покрытие: Обслуживаем более 150 стран, включая быструю доставку в Саудовскую Аравию и ОАЭ.

Возвраты и гарантия

  • 30-дневная гарантия: Принимаются возвраты товаров со склада в оригинальной, заводской упаковке.
  • 12-месячная гарантия: Каждый промышленный компонент поддерживается нашей профессиональной технической гарантией.

Заказы обрабатываются и доставляются с понедельника по пятницу (кроме государственных праздников).


Для полной информации о праве на возврат, сборах за пополнение запасов и международных возвратах, пожалуйста, ознакомьтесь с нашим официальным Политика возврата и возмещения .

TECHNICAL SPECIFICATIONS

Country of origin
Соединённые Штаты

Недавно просмотренные товары

Технические знания

Электрические приводы, разработанные для замены гидравлических систем: практическое руководство по промышленной автоматизации

В этой статье объясняется, как интегрированные электрические приводы, такие как серия e-Actuator от SMC, преобразуют промышленное управление движением, заменяя традиционные пневматические и...

Математические операции с использованием OpenPLC для промышленных автоматизированных систем

В этой статье объясняется, как системы ПЛК выполняют основные математические операции, такие как сложение, вычитание, умножение, деление, взятие остатка и возведение в степень в рамках промышленной...

Продвинутая булева логика с программированием ПЛК на FBD: практические промышленные применения за пределами базовой логики

В статье объясняются несколько продвинутых функций булевой логики, используемых в программировании ПЛК, помимо базовых операций AND, OR и NOT. Рассматривается, как такие инструменты, как таблицы...

Булева логика в программировании ПЛК: понимание логических элементов FBD

Булева логика является основой каждой программы ПЛК. От простого управления машинами до сложных систем промышленной автоматизации, логические элементы определяют, как контроллеры реагируют на...

Подробное руководство по промышленным файрволам и сегментации сетей ОТ

Промышленные межсетевые экраны играют ключевую роль в кибербезопасности операционных технологий (OT), защищая сети PLC, DCS и SCADA посредством сегментации, контроля входящего и исходящего трафика, а...

Руководство по роботизированным захватам: от деликатного обращения до тяжелой автоматизации

Современные роботизированные захваты развиваются дальше традиционных механических челюстей. От клеевых систем, вдохновленных гекконами, и мягких захватов пищевого класса до инструментов для складов с...