Bently Nevada 330130-045-02-05 3300 XL Standard Extension Cable

Description

Configured with a 4.5-meter length (Option 045) and pre-installed connector protectors (Option 02), the Bently Nevada 330130-045-02-05 3300 XL Standard Extension Cable provides connection integrity for 3300 XL proximity transducer loops. This standard extension cable acts as the transmission bridge between a 3300 XL 8 mm proximity probe and a 3300 XL Proximitor sensor. By implementing the Option 02 configuration, the assembly utilizes a standard 3.68 mm coaxial cable with factory-installed connector protectors on both ends to shield against fluid, dirt, and moisture ingress in demanding industrial environments.

The standard 3300 XL extension cable incorporates gold-plated ClickLoc coaxial connectors that click together firmly, requiring only finger-tight torque to establish a secure locking mechanism that resists rotational loosening under continuous machinery vibration. Option 05 designated on this specific model ensures compliance with major international hazardous area certifications, including CSA, ATEX, and IECEx approvals. It is fully compatible with standard 3300 XL 8 mm proximity transducer setups and can also be used interchangeably with legacy non-XL 3300 series 5 mm and 8 mm system components.

Features

• Option 045 configuration delivers a 4.5-meter (14.8 feet) total cable length.
• Option 02 provides standard 3.68 mm outside diameter coaxial cable equipped with pre-installed connector protectors.
• Option 05 designates multi-agency hazardous area approvals for CSA, ATEX, and IECEx.
• Gold-plated ClickLoc coaxial connectors resist corrosion and prevent accidental detachment under high vibration.
• Compatible with Bently Nevada standard 3300 XL 8 mm proximity probes and standard Proximitor sensors.
• Interchangeable and backward compatible with standard non-XL 3300 series 5 mm and 8 mm components.

Applications

This extension cable is used in turbo-machinery protection systems and machinery diagnostic setups for industries such as power generation, oil and gas, petrochemical, and water treatment. It is suitable for connecting probes to transmitters in the following systems:

• Steam turbines and gas turbines
• Centrifugal compressors and reciprocating compressors
• Industrial pumps, fans, and cooling towers
• Generators and electric motor bearing houses

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Always maintain a bend radius greater than the minimum limit of 25.4 mm (1.0 in) to prevent internal shield breakage and signal degradation.
• Ensure both male and female coaxial mating surfaces are free of moisture, oil, and particulates before snapping them together.
• Hand-tighten ClickLoc connectors until an audible click is felt; do not use pliers or other mechanical tools on gold ClickLoc fittings to prevent deformation.
• For harsh environments, ensure the connector protectors are fully slid over the connected junction to prevent fluid ingress.
• Keep extension cabling separated from high-voltage motor feeds or switching lines to avoid electromagnetic interference.

Compliance and Certifications