Siemens 6AV7240-6BD17-0AQ3 SIMATIC IPC 477D Панельный ПК

Description

This is a Siemens SIMATIC IPC 477D Panel PC, model 6AV7240-6BD17-0AQ3, an integrated human-machine interface (HMI) solution for demanding industrial environments. It features a 15-inch touch display and is powered by an Intel Core i7-3517UE processor with 8 GB of RAM. This unit is configured without internal mass storage, allowing for flexible drive selection and replacement. It comes pre-loaded with a comprehensive software package including Windows 7 Ultimate, WinAC RTX F 2010 SP2, and WinCC RT Advanced licenses, making it suitable for complex visualization and real-time control tasks.

Features

• 15-inch resistive touch display for operator interaction.
• Powered by an Intel Core i7-3517UE dual-core processor.
• Equipped with 8 GB of system memory.
• Dual Gigabit Ethernet ports for network connectivity (IE/PN).
• Multiple USB ports: four on the rear and one on the front for peripheral access.
• Includes one RS-232 serial port and one PCIe expansion slot.
• Pre-installed with Windows 7 Ultimate (64-bit) operating system.
• Bundled with WinAC RTX F 2010 SP2 and WinCC RT Advanced V13/V15 software licenses.
• Powered by a 110/230V AC industrial power supply with NAMUR compliance.

Applications

• Process visualization and control (SCADA/HMI)
• Machine-level data acquisition and logging
• Manufacturing Execution Systems (MES) terminals
• Industrial automation control panels
• PC-based automation with software PLC requirements

Technical Specifications

Installation Guidelines

1. 1
   Site Preparation: Ensure the panel cutout dimensions match the IPC 477D specifications. The mounting surface must be clean, flat, and capable of supporting the unit's weight. Maintain required clearance for ventilation and cable access.
2. 2
   Mounting: Insert the Panel PC into the prepared cutout from the front. Secure the unit from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross-pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
3. 3
   Grounding: Connect the protective earth (PE) terminal on the IPC chassis to the main control panel's protective earth bus using a low-impedance conductor. A proper ground connection is critical for safety and noise immunity.
4. 4
   Power Connection: Connect the provided AC power cable to the unit's power supply input. Ensure the source voltage (110V or 230V AC) matches the supply rating. Route the power cable separately from signal and communication cables to minimize interference.
5. 5
   I/O and Network Cabling: Connect Ethernet, USB, and serial cables as required. Use shielded cables for all communication links. Ensure all connectors are fully seated and secured. Power on the unit only after all connections are made and verified.