Siemens 6AV7612-0AF10-0AE0 SIMATIC Panel PC 670

Description

This is a Siemens 6AV7612-0AF10-0AE0, a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT touch display and is powered by a 300 MHz Celeron processor. It is configured with 64 MB of RAM, a 40 GB hard drive, and an integrated CD-ROM drive. The system operates on a 24 VDC power supply and comes pre-installed with a German-language version of Windows 98. Please note this model is considered an obsolete part, often used for maintenance and replacement in existing systems.

Features

• 12-inch TFT color display with touch functionality
• Intel Celeron processor operating at 300 MHz
• Equipped with 64 MB of system RAM
• Includes a 40 GB hard disk drive for local storage
• Integrated CD-ROM drive for software installation and data access
• Standard 24 VDC power input for industrial environments
• Pre-installed with Windows 98 (German language)

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition (SCADA)
• Industrial data logging and reporting
• Replacement unit for legacy automation systems
• Factory automation and assembly line control panels

Technical Specifications

Installation Guidelines

1. 1 Prepare Enclosure: Ensure the panel cutout dimensions are precise for the PC 670 chassis. Verify the mounting surface is flat, clean, and can support the unit's weight.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal and prevent chassis distortion.
3. 3 Protective Earth (PE) Connection: Connect the enclosure's PE terminal to the central grounding point of the cabinet using a low-impedance, short-length conductor. This is critical for safety and noise immunity.
4. 4 Connect Power: Connect a stable, filtered 24 VDC power source to the designated power input terminals. Verify correct polarity before energizing the circuit. Use appropriately sized wiring for the load.
5. 5 Connect Peripherals: Connect all required communication and I/O cables (e.g., Ethernet, serial, USB). Ensure all cable shields are properly terminated at one end to prevent ground loops.