Siemens 6AV7802-0AB22-1AB0 SIMATIC Панельный ПК 677

Description

The Siemens 6AV7802-0AB22-1AB0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touch display with a 1024x768 resolution, powered by an Intel Pentium M 1.6 GHz processor. It is equipped with 1 GB of DDR266 SDRAM and a redundant storage system consisting of dual 60 GB hard drives configured for RAID. The system operates on a 24V DC power supply and includes a front-side USB interface for convenient peripheral access.

Features

• 15-inch TFT touch display with 1024x768 pixel resolution
• Intel Pentium M 770 processor operating at 1.6 GHz
• 1 GB DDR266 SDRAM for application processing
• Dual 60 GB hard disk drives with RAID support for data redundancy
• Integrated DVD-ROM optical drive
• Convenient front-panel USB interface
• Operates on a standard 24V DC industrial power supply
• Pre-installed with Windows 2000 Professional (Multi-language)

Applications

• Human-Machine Interface (HMI) for process control
• Industrial data acquisition and logging
• Machine and plant floor visualization
• Supervisory Control and Data Acquisition (SCADA) nodes
• Manufacturing Execution Systems (MES) terminals

Technical Specifications

Installation Guidelines

1. 1
   Panel Cutout and Mounting: Prepare the control cabinet or panel cutout according to the manufacturer's specified dimensions. Ensure the mounting surface is flat and clean. Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps to maintain the specified IP rating. Do not overtighten.
2. 2
   Protective Earth (PE) Connection: Connect the designated grounding terminal on the Panel PC chassis to the main protective earth conductor of the control cabinet. Use a low-impedance connection with a wire of appropriate gauge to ensure personnel safety and reduce electromagnetic interference (EMI).
3. 3
   Power Supply Connection: Connect a stable, regulated 24V DC power source to the power input terminals. Verify correct polarity (+/-) before applying power. It is recommended to use a dedicated, isolated power supply unit (PSU) rated for industrial environments.
4. 4
   Peripheral and Network Connections: Connect all required peripherals, such as keyboards, mice, or USB devices, and network cables. Ensure all cable connections are secure and properly seated. Route cables away from high-voltage lines to minimize noise induction.
5. 5
   System Power-Up: After verifying all connections are correct and secure, re-energize the main power supply. Power on the Panel PC and observe the boot sequence to ensure the operating system loads correctly. Proceed with application-specific software configuration.