Siemens 6AV7892-0BF10-1AA0 SIMATIC IPC677C Panel PC

Description

The Siemens 6AV7892-0BF10-1AA0 is a SIMATIC IPC677C Panel PC designed for demanding Human-Machine Interface (HMI) and control tasks in industrial environments. This unit integrates a 15-inch touch display with a 1024x768 resolution and an Intel Core i3-330E processor. It is equipped with 2 GB of DDR3 RAM, a 250 GB SATA HDD, and an integrated DVD drive. Connectivity is provided through dual Gigabit Ethernet ports, a dedicated PROFINET interface, multiple USB 2.0 ports, and a serial port. The system includes onboard monitoring for watchdog, temperature, and fan status, and is powered by a 110/230 V AC NAMUR-compliant supply. This model is supplied without a pre-installed operating system, offering flexibility for custom software deployment.

Features

• 15-inch touch display with 1024 x 768 pixel resolution
• Front-side USB interface for convenient access
• Intel Core i3-330E processor (2.13 GHz, 2 Cores / 4 Threads)
• 2 GB DDR3 1066 DIMM system memory
• 250 GB SATA Hard Disk Drive (HDD) for data storage
• Integrated DVD±R/±RW optical drive
• Onboard RAID controller for data redundancy configurations
• Dedicated PROFINET interface (3x RJ45, CP 1616-compatible)
• Dual 10/100/1000 Mbit/s Ethernet ports for network communication
• Integrated system monitoring for watchdog, temperature, and fan status
• Two free PCI slots for hardware expansion
• Supplied without an operating system

Applications

• Process visualization and control
• Machine-level data acquisition and logging
• Factory automation and plant floor HMI stations
• Industrial control rooms and operator panels
• PC-based automation systems requiring robust hardware

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the manufacturer's dimensional drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit.
2. 2 Verify that adequate clearance is maintained around the unit for ventilation. Obstructed airflow can lead to overheating and component failure.
3. 3 Insert the Panel PC into the cutout and secure it using all provided mounting clamps. Tighten clamps evenly to ensure a proper seal and prevent mechanical stress on the chassis.
4. 4 Connect the protective earth (PE) or grounding terminal to the cabinet's main ground point using a low-impedance conductor. This connection is critical for safety and noise immunity.
5. 5 Connect the AC power supply, network cables (Ethernet/PROFINET), and any required peripheral devices (USB, Serial). Ensure all connectors are fully seated.
6. 6 Secure all cables with appropriate strain relief to prevent accidental disconnection and damage to the ports. Route cables away from sources of high electrical noise.