Siemens 6ES7647-7BL30-0XX0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7647-7BL30-0XX0 is a compact, fanless SIMATIC IPC427C series Microbox PC designed for demanding automation tasks. This embedded industrial computer is configured with an Intel Core 2 Duo 1.2 GHz processor, 2 GB of DDR3 RAM, and an integrated PROFINET interface with 3 ports. This specific model is supplied without any internal drives or a pre-installed operating system, offering a flexible hardware base for custom software deployments and control applications. Its robust, maintenance-free design makes it suitable for installation directly at the machine level or within control cabinets.

Features

• Processor: Intel Core 2 Duo running at 1.2 GHz
• Memory: 2 GB DDR3 1066 SODIMM
• Networking: Integrated PROFINET controller with 3 RJ45 ports
• Storage: Supplied without internal or swappable drives
• Operating System: Not included
• Design: Compact and fanless Microbox PC form factor
• Product Lifecycle: Designated as a Phase-Out product

Applications

• Machine-level data processing and control
• HMI and visualization tasks
• Communication gateway between different network protocols
• Data logging and acquisition systems
• Embedded control solutions in manufacturing and process automation

Technical Specifications

Installation Guidelines

1. 1 Verify the part number 6ES7647-7BL30-0XX0 matches the project requirements. Inspect the unit for any signs of shipping damage.
2. 2 Mount the Microbox PC securely onto a DIN rail or panel surface inside a suitable enclosure that provides protection against environmental factors. Ensure adequate clearance for ventilation and cable access.
3. 3 Connect the chassis to the cabinet's protective earth (PE) busbar using a low-impedance grounding conductor. A proper ground connection is essential for safety and noise immunity.
4. 4 Connect the 24V DC power supply to the designated power input terminals. Verify correct polarity before applying power. Use appropriately sized wiring for the load.
5. 5 Connect PROFINET and any other required communication cables. Ensure all connectors are fully seated and secured. Use shielded cables for industrial network connections.
6. 6 After verifying all connections are correct and secure, remove LOTO devices and apply power to the unit. Proceed with operating system installation and software configuration.