Siemens 6ES7716-2CA11-0CD3 SIMATIC Field PG M4 Industrial Programming Device

Description

The Siemens 6ES7716-2CA11-0CD3 is a SIMATIC Field PG M4 Premium Plus industrial programming device, engineered for commissioning, servicing, and maintaining automation systems directly in the field. This promotional package is equipped with a 300 GB SATA Solid-State Drive (SSD) for rapid performance and 16 GB of RAM (2x 8 GB modules) to handle complex engineering projects. It features a 15.6-inch Full HD display (1920x1080) for clear visualization of schematics and HMI screens. The unit comes pre-loaded with Windows 7 Ultimate SP1 (64-bit) and includes essential software licenses for STEP 7 Professional V13 and WinCC Advanced V13, providing a comprehensive engineering environment out of the box. Note that this model is supplied without an S5 interface or S5 EPROMMER.

Features

• 15.6-inch Full HD display with 1920 x 1080 resolution
• 300 GB SATA Solid-State Drive (SSD) for fast data access
• 16 GB of installed RAM (2 x 8 GB modules)
• Pre-installed Windows 7 Ultimate SP1 (64-bit) operating system
• Includes software licenses for STEP 7 Professional V13 and WinCC Advanced V13
• QWERTY keyboard layout with German character set
• Package includes a power supply cable for the UK and an MPI cable

Applications

• PLC and HMI programming and configuration
• Commissioning of industrial automation systems
• On-site diagnostics and troubleshooting of machinery
• System maintenance and software updates in industrial environments
• Mobile engineering workstation for automation technicians and engineers

Technical Specifications

Installation and Handling Guidelines

1. 1 Upon receipt, carefully inspect the Field PG and all accessories for any signs of physical damage that may have occurred during transit. Do not power on the device if damage is suspected.
2. 2 Connect the provided UK power supply cable to a properly grounded AC mains outlet that complies with local electrical codes. Ensure the connection is secure at both the wall outlet and the device.
3. 3 Power on the device and allow the Windows 7 operating system to complete its initial startup sequence. Verify that the pre-installed Siemens software (STEP 7, WinCC) launches correctly.
4. 4 Before connecting to any live industrial network or controller, confirm all network interface settings (IP address, subnet mask) are configured correctly to prevent network conflicts.
5. 5 Use only the included MPI cable for direct connections to SIMATIC S7 PLCs to ensure reliable communication and prevent damage to the communication ports.