Siemens 6SE6400-4BE24-2FA0 MICROMASTER 4 Braking Resistor

Остался только 5 товар(ы) на складе

Производитель: Siemens
Номер продукта: 6SE6400-4BE24-2FA0
Страна происхождения:Германия
Тип продукта: Braking Resistor
Штрихкод: 85049099
Оплата: Т/Т, Western Union
Вес: 16800г
Размеры: 38.10cm x 35.60cm x 63.50cm
Порт отгрузки: Сямынь
Гарантия: 12 месяцев

The 6SE6400-4BE24-2FA0 is a high-performance braking resistor designed specifically for the MICROMASTER 4 series of AC drives. Its primary function is to dissipate the regenerative energy generated when an AC motor acts as a generator during deceleration or braking phases. With a high peak power rating of 84,000 W and a continuous load capacity of 4,200 W, this resistor provides a robust solution for large-scale industrial drives requiring frequent, high-inertia stops.

Features

Series: MICROMASTER 4 Accessory
Braking Capacity: 84,000 W (Peak), 4,200 W (Continuous)
Resistance: 12 Ohm
Voltage Rating: 500-600 V
Protection Class: IP20
Status: Phase-Out

Applications

High-inertia braking applications (centrifuges, large fans)
Rapid deceleration for production lines
Hoist and crane motion control
Emergency stopping of heavy-duty machinery
Energy dissipation in regenerative industrial drive systems

Technical Specifications

Parameter	Specification
Brand	Siemens
Model	6SE6400-4BE24-2FA0
Range	Micromaster 4
Peak Power	84,000 W
Continuous Power	4,200 W
Resistance	12 Ohm
Voltage Range	500-600 V
Protection	IP20
Weight	16.80 kg
Dimensions	38.10 x 35.60 x 63.50 cm
Commodity Code	85049099
Product Phase	Phase-Out

Installation Guidelines

Ventilation: Due to the heat generated during the dissipation process, the braking resistor must be mounted in a well-ventilated area, preferably with upward airflow to ensure the heat dissipates away from the inverter and sensitive electronics.
Proximity: Keep the resistor as close as possible to the inverter’s braking module to minimize the length of high-power cabling, which reduces the potential for electromagnetic interference (EMI).
Clearance: Maintain the specified dimensions for mounting and ensure surrounding materials are flame-retardant, as the surface temperature of the resistor increases significantly during operation.
Safety: Connect the resistor to the dedicated braking terminals on the inverter or braking chopper module. Ensure that the circuit includes thermal protection—if the inverter software supports it, configure the resistor's thermal time constant to prevent overheating.

Key Features:

#Braking Resistors #Siemens

What happens to the kinetic energy during deceleration?

During motor deceleration, the kinetic energy of the load is converted back into electrical energy by the motor. This energy flows back to the drive's DC link; the braking resistor converts this excess electrical energy into heat to prevent DC link overvoltage.

Why is the continuous power rating lower than the peak power rating?

The peak power rating refers to the resistor's ability to handle short, intense bursts of energy, while the continuous power rating is the thermal limit the resistor can handle indefinitely without exceeding its safe operating temperature.

What is the importance of the 12 Ohm resistance value?

The resistance value is calculated to match the drive's internal braking chopper requirements. Using a resistor with the incorrect resistance can result in insufficient braking torque or damage to the braking chopper electronics.

Is active cooling required for this resistor?

While it is designed for passive heat dissipation via its housing, it must be mounted in a location with adequate airflow. If the installation environment is restricted, additional forced-air cooling may be necessary to maintain safe operating temperatures.

Глобальная экспресс-доставка

Стандартная доставка: 4-6 рабочих дней через DHL, FedEx и UPS.
Экспресс-отправка: Отправка в тот же день для заказов со склада, сделанных до 14:00 (GMT+8).
Мировое покрытие: Обслуживаем более 150 стран, включая быструю доставку в Саудовскую Аравию и ОАЭ.

Возвраты и гарантия

30-дневная гарантия: Принимаются возвраты товаров со склада в оригинальной, заводской запечатанной упаковке.
12-месячная гарантия: Каждый промышленный компонент поддерживается нашей профессиональной технической гарантией.

Заказы обрабатываются и доставляются с понедельника по пятницу (кроме государственных праздников).

Для полной информации о праве на возврат, сборах за пополнение запасов и международных возвратах, пожалуйста, ознакомьтесь с нашим официальным Политика возврата и возврата средств .

TECHNICAL SPECIFICATIONS

Color pattern	Серебро
Country of origin	Германия

Siemens 6SE6400-4BE24-2FA0 MICROMASTER 4 Braking Resistor