Bently Nevada 330104-00-08-50-12-00 3300 XL 8 mm Proximity Probe

Description

Continuous shaft vibration and position monitoring in critical rotating machinery rely on highly accurate, rugged transducer systems. The 330104-00-08-50-12-00 acts as a core eddy current sensor within the Bently Nevada 3300 XL 8 mm Proximity Probe series. Designed for demanding industrial environments, this non-contacting sensor measures static (position) and dynamic (vibration) parameters when paired with a compatible 3300 XL Proximitor Sensor.

The configuration of this specific model includes an unthreaded length of 0 mm and an overall case length of 80 mm, providing a compact profile for direct mounting. It features a 5.0-meter (16.4 feet) FluidLoc cable terminated with a miniature coaxial ClickLoc connector, engineered to prevent moisture and fluid migration through the cable assembly. This system delivers exceptional performance and thermal stability in lubrication oil and harsh process environments.

Features

• 8 mm probe tip diameter compatible with standard 3300 XL series installations.
• FluidLoc cable design to prevent process fluid leakage along the inner core of the cable.
• Miniature coaxial ClickLoc connector provides a secure, vibration-resistant link.
• Designed for non-contacting dynamic vibration and static displacement measurements.
• Excellent thermal stability and resistance to corrosive industrial lubricants.

Applications

• Steam and gas turbines
• Centrifugal and axial compressors
• Industrial pumps and process fans
• Hydroelectric generators
• Gearboxes and high-speed machinery monitoring

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Ensure proper physical clearance (side-clearance) around the probe tip to prevent side-loading or target-sensing interference.
• Tighten the probe case using the specified torque limits to avoid casing deformation or thread damage.
• Route the FluidLoc cable away from sharp edges, high-temperature sources, and high-voltage wiring to minimize electromagnetic interference.
• Ensure the ClickLoc connection is clean and dry before mating; hand-tighten until the connector clicks to lock.