Siemens 6AV7764-0AA00-0AT0 SIMATIC OEM-PC870 Touch Panel

Description

The Siemens 6AV7764-0AA00-0AT0 is an OEM-PC870 industrial touch panel computer from the SIMATIC family, engineered for machine control applications in demanding production environments. This unit is equipped with a 15-inch touchscreen, a Pentium III 1.2 GHz processor, and 512 MB of RAM. It is delivered without a pre-installed operating system or application software, offering a flexible platform for custom HMI configurations. The system includes a 20.4 GB hard drive and an LS240 floppy drive for legacy data compatibility, and is prepared for HMI-FO Link integration.

Features

• 15-inch integrated touchscreen display
• Pentium III processor operating at 1.2 GHz
• 512 MB of installed RAM
• 20.4 GByte internal hard drive for application and data storage
• Integrated LS240 floppy drive for legacy media support
• Supplied without an operating system for custom software deployment
• Prepared for HMI-FO Link (Fiber Optic) integration

Applications

• Human-Machine Interface (HMI) for industrial machinery
• Process visualization and control systems
• Data acquisition and logging in factory environments
• Control panels for manufacturing and assembly lines
• Integration into legacy automation systems requiring floppy disk support

Technical Specifications

Installation Guidelines

1. 1 De-energize the main control cabinet and verify the absence of voltage using a properly rated test instrument before beginning work.
2. 2 Prepare the panel cutout according to the device's mechanical specifications. Ensure the mounting surface is clean, flat, and free of debris.
3. 3 Insert the touch panel into the cutout from the front. Secure it from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal.
4. 4 Connect the main power supply wiring to the designated terminals. Use appropriately sized conductors and ensure polarity is correct.
5. 5 Establish a low-impedance protective earth (PE) connection to the chassis ground stud. This is critical for operator safety and noise immunity.
6. 6 Connect all necessary communication cables (e.g., Ethernet, serial, HMI-FO Link) and any peripheral devices. Ensure proper cable shielding and grounding practices are followed.
7. 7 After a final inspection of all connections, close the cabinet door, remove the LOTO device, and re-energize the system for software installation and commissioning.