Siemens 6ES7647-6BG26-0WF0 SIMATIC BOX PC 627B Industrial PC

Description

The Siemens 6ES7647-6BG26-0WF0 is a SIMATIC BOX PC 627B designed for robust industrial applications. This unit is equipped with an Intel Core 2 Duo T7400 2.16 GHz processor, 1 GB of DDR2 RAM, and a 24 V DC industrial power supply. It provides extensive connectivity with dual Gigabit Ethernet ports, four high-current USB 2.0 ports, and a serial COM port. The system features onboard graphics with 128 MB of shared memory and includes an integrated RAID controller. For storage, it is configured with two CompactFlash drive slots, one front-accessible and one internal, and is supplied with Windows XP Embedded on a 2 GB CompactFlash card.

Features

• Intel Core 2 Duo T7400 processor at 2.16 GHz
• 1 GB DDR2 667 SODIMM memory
• Dual 10/100/1000 Mbit/s Ethernet ports for network redundancy or separation
• Four high-current USB 2.0 ports for peripheral devices
• Onboard RAID controller for data integrity
• Integrated monitoring for watchdog, temperature, and fan status
• Two available PCI slots for hardware expansion
• Operates on a 24 V DC industrial power supply

Applications

• Process visualization and HMI stations
• Data acquisition and logging systems
• Industrial control and automation gateways
• Machine vision and quality control systems
• Shop-floor data collection terminals

Technical Specifications

Installation Guidelines

1. 1 Site Preparation: Select a mounting location within an enclosure that provides adequate ventilation and protection from excessive vibration, moisture, and contaminants. Ensure sufficient clearance around the unit for airflow and cable access.
2. 2 Mounting: Securely fasten the Box PC to the mounting panel using all provided mounting points. Ensure the chassis is level and stable to prevent mechanical stress.
3. 3 Grounding: Connect the chassis ground terminal to the main panel's protective earth (PE) bus bar using a low-impedance conductor. A reliable ground connection is essential for safety and noise immunity.
4. 4 Power Connection: Connect the 24 V DC power supply to the designated input terminals. Verify the polarity is correct before energizing the circuit. Use appropriately sized wiring for the load and distance.
5. 5 I/O and Peripheral Wiring: Connect Ethernet, USB, serial, and any other required cables. Route signal cables separately from power cables to minimize electromagnetic interference. Ensure all connectors are fully seated.
6. 6 Final System Check: After all connections are made, re-verify wiring against schematics. Apply power to the unit and check for correct boot sequence and status indicators. Proceed with software configuration as required.