Siemens 6ES7647-6CD36-0LA1 SIMATIC IPC627C Box PC

Description

The Siemens 6ES7647-6CD36-0LA1 is a SIMATIC IPC627C series Box PC designed for demanding industrial applications. This unit is powered by an Intel Core i3-330E processor and features onboard HD graphics. Connectivity is provided through dual Gigabit Ethernet ports, four high-current USB 2.0 ports, and a serial COM port. For system reliability, it incorporates an onboard RAID controller, a watchdog timer, and integrated monitoring for temperature and fan status. This specific model is configured with a front-accessible CompactFlash drive slot. Please note, this product is in the "Phase-Out" stage of its lifecycle.

Features

• Equipped with an Intel Core i3-330E processor
• Onboard HD graphics for display output
• Dual 10/100/1000 Mbit/s Ethernet RJ45 ports
• Four high-current USB 2.0 ports
• One serial (COM1) interface
• Integrated RAID controller for data redundancy
• Front-accessible CompactFlash drive slot
• Built-in watchdog timer for system monitoring
• Hardware monitoring for temperature and fan speed

Applications

• Machine-level data acquisition and processing
• Supervisory control and HMI server tasks
• Industrial network gateways
• Compact control room and panel PC applications
• Process visualization and logging

Technical Specifications

Installation Guidelines

1. 1 De-energize the control cabinet and verify zero-energy state before beginning work.
2. 2 Ensure the mounting location provides adequate clearance for ventilation and cable access, respecting the specified ambient operating temperature range.
3. 3 Securely fasten the Box PC to the mounting plate or panel using all provided mounting points to ensure mechanical stability and proper grounding.
4. 4 Connect the chassis to the main protective earth (PE) busbar using a low-impedance conductor of appropriate gauge.
5. 5 Connect all communication, I/O, and peripheral cables. Ensure proper strain relief and route signal cables separately from high-voltage power lines to minimize noise.
6. 6 Connect the specified DC power supply to the unit's power input terminal, ensuring correct polarity.
7. 7 After verifying all connections, re-energize the cabinet and monitor the device for correct power-on sequence and system boot.