Siemens 6ES7647-7BA20-0AX0 SIMATIC IPC427C Microbox PC

Description

This is a Siemens 6ES7647-7BA20-0AX0, a compact and fanless SIMATIC IPC427C Microbox PC designed for automation tasks. This specific configuration is equipped with a Celeron M 1.2 GHz processor, 1 GB of DDR3 RAM, and a 320 GB SATA HDD for internal storage. The unit is delivered without a pre-installed operating system, providing flexibility for custom software deployment. Its robust design is suitable for machine-level data processing, visualization, and control applications in industrial environments.

Features

• Processor: Celeron M operating at 1.2 GHz
• System Memory: 1 GByte DDR3 1066 SODIMM
• Internal Storage: 320 GB SATA Hard Disk Drive (HDD)
• Front Side Bus (FSB): 800 MHz
• Processor Cache: 1 MB SLC
• Supplied without an operating system
• Compact Microbox PC form factor

Applications

• Human-Machine Interface (HMI) systems
• Data acquisition and logging
• Communication gateways
• Small-scale process control and monitoring
• Machine vision systems
• Embedded control solutions

Technical Specifications

Installation Guidelines

1. 1
   Site Preparation: Select a mounting location within a control cabinet or on a secure panel that provides adequate ventilation and clearance around the unit for heat dissipation. Protect the device from excessive vibration, moisture, and corrosive atmospheres.
2. 2
   Mounting: Securely fasten the Microbox PC to the mounting surface using all provided mounting points. Ensure the unit is level and stable to prevent mechanical stress on connectors and internal components.
3. 3
   Grounding: Connect the chassis grounding terminal to the main system protective earth (PE) busbar using a low-impedance conductor. A proper ground connection is essential for safety and noise immunity.
4. 4
   Power and I/O Wiring: Connect the DC power supply, ensuring correct polarity and voltage. Connect all peripheral and communication cables (e.g., Ethernet, USB, display). Route cables neatly and secure them to prevent strain on the connectors.
5. 5
   System Commissioning: After verifying all connections, re-energize the system. Proceed with operating system installation, driver configuration, and application software deployment as required.