Siemens 6ES7654-0UE13-0XX0 SIMATIC PCS 7 AS RTX Automation System

Description

This is a Siemens 6ES7654-0UE13-0XX0 SIMATIC PCS 7 AS RTX automation system, engineered as a robust controller based on the IPC427C industrial PC platform. It is equipped with an Intel Core2 Duo 1.2 GHz processor, 2 GB of DDR3 RAM, and a 4 GB swappable Compact Flash card for storage. The system comes pre-installed with the WinAC RTX 2010 software controller and a Runtime license AS PO100, making it ready for deployment in PCS 7 environments from version 7.1 SP2 onwards. An onboard CP5611 provides integrated PROFIBUS/MPI communication capabilities.

Features

• Based on the Siemens IPC427C industrial PC hardware.
• Processor: Intel Core2 Duo at 1.2 GHz with 800 MHz FSB.
• Memory: 2 GB DDR3 1066 SODIMM RAM.
• Storage: 4 GB swappable Compact Flash card.
• Integrated Communications: Onboard CP5611 for PROFIBUS/MPI.
• Pre-installed Software: WinAC RTX 2010 Software Controller.
• Operating System: Windows Embedded Standard 2009.

Applications

Designed for demanding process control tasks within the SIMATIC PCS 7 distributed control system framework. Suitable for deployment in industries such as:

• Chemical and Petrochemical Processing
• Power Generation and Distribution
• Water and Wastewater Treatment
• Pharmaceutical and Life Sciences
• Glass and Cement Manufacturing

Technical Specifications

Installation Guidelines

1. 1 Verify the control cabinet is de-energized and that all Lockout/Tagout (LOTO) procedures are in effect.
2. 2 Securely mount the IPC427C unit inside the panel. Ensure adequate clearance around the unit for ventilation to prevent overheating.
3. 3 Connect the chassis ground terminal to the main cabinet protective earth (PE) busbar using a short, low-impedance grounding conductor.
4. 4 Connect the PROFIBUS or MPI network cable to the onboard CP5611 port. Ensure proper termination of the bus segment.
5. 5 Connect the specified DC power supply to the power input terminals, strictly observing correct polarity.
6. 6 After double-checking all connections, remove LOTO devices and re-energize the cabinet to begin system commissioning.