Siemens SIMATIC IPC 477D 6AV7240-6BD07-6HA2 Panel PC

Description

This is a Siemens SIMATIC IPC 477D, part number 6AV7240-6BD07-6HA2, a robust panel PC designed for industrial automation and control applications. This specific configuration is equipped with an Intel Core i7-3517UE processor, 8 GB of RAM, and an 80 GB MLC Solid-State Drive for reliable performance. It features a 15-inch touch display for operator interaction and comes pre-installed with Windows 7 Ultimate (64-bit). The unit is powered by an AC 110/230V industrial power supply with NAMUR compliance and includes a power cable for European use.

Features

• Intel Core i7-3517UE Processor
• 15-inch resistive touch display
• 8 GB of system memory
• 80 GB Standard (MLC) Solid-State Drive (SSD)
• Integrated DVD drive
• Dual Gigabit Ethernet (IE/PN) ports
• Pre-installed with Windows 7 Ultimate (64-bit)
• AC 110/230V industrial power supply (NAMUR)

Applications

• Human-Machine Interface (HMI) for process visualization
• Data acquisition and logging systems
• Machine control and automation on the factory floor
• Supervisory control and data acquisition (SCADA) nodes

Technical Specifications

Installation Guidelines

1. 1 Ensure the mounting panel is clean, flat, and prepared with the correct cutout dimensions for the IPC 477D. Verify sufficient clearance for ventilation and cable routing.
2. 2 Insert the Panel PC into the cutout from the front. Secure it evenly from the rear using all provided mounting clamps. Do not overtighten the clamps to avoid deforming the bezel.
3. 3 Connect a dedicated protective earth (PE) or grounding conductor to the designated chassis ground terminal. A low-impedance ground connection is essential for safety and noise immunity.
4. 4 Connect the AC power supply cable to the unit's power input. Ensure the source voltage (110V or 230V AC) matches the power supply rating.
5. 5 Connect Ethernet, USB, and serial communication cables as required. Use shielded cables for all data lines and ensure shields are properly terminated to minimize electrical noise.
6. 6 After verifying all connections are secure and correct, remove the lockout/tagout device and re-energize the main power supply to the panel.