Manufacturer: Weidmuller
Product No.: 8965500000
Country of origin:เยอรมนี
Product Type: Power Feed-In Modules
Payment: T/T, Western Union
Weight: 1200g
Dimensions: 119.2 mm x 22.5 mm x 113.6 mm
Shipping port: Xiamen
Warranty: 12 months
Designed to optimize power distribution within modular DIN-rail systems, the Weidmuller 8965500000 ACT20-FEED-IN-PRO-S provides a centralized feed-in point for the ACT20 series and CH20M bus system. This high-efficiency module simplifies cabinet wiring by distributing supply voltage directly to adjacent modules via the rail bus, reducing point-to-point wiring and minimizing installation time.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Weidmuller |
| Article Number (SKU) | 8965500000 |
| Model Designation | ACT20-FEED-IN-PRO-S |
| Product Type | Power Feed-In Module |
| Supply Voltage Range | 19.2 to 31.2 V DC |
| Power Consumption | <= 2.0 W |
| Efficiency | > 97.9% |
| Connection Type | Screw connection |
| Protection Degree | IP20 |
| Operating Temperature | -20 to +60 degC |
| Storage Temperature | -20 to +85 degC |
| Relative Humidity | 0% to 95% (non-condensing) |
| Dimensions (H x W x D) | 119.2 mm x 22.5 mm x 113.6 mm |
| Net Weight | 0.140 kg |
| Shipping Weight | 1.20 kg (including protective packaging) |
| Terminal / Port | Functional Assignment |
|---|---|
| Input + / - | Primary 24 V DC supply input connection |
| CH20M Bus Interface | Direct power distribution contacts to the DIN-rail bus |
| Status Relay | Collective error message output (normally closed / normally open contact) |
The ACT20-FEED-IN-PRO-S is fully compatible with all Weidmuller ACT20 series signal converters and isolators that utilize the CH20M DIN-rail bus. It can replace standard passive feed-in terminals when active collective error monitoring and diagnostic feedback are required for the control system.
Ensure that the total current drawn by all modules connected to the CH20M bus does not exceed the maximum bus current rating (typically 4 A). If your module configuration exceeds this limit, you must install an additional feed-in module to segment the power distribution groups.
When wiring the collective error relay, integrate the contact into your PLC's safety loop or alarm input. This ensures that any power loss or module fault on the CH20M bus is instantly flagged in the control room, reducing troubleshooting downtime.
De-energize all primary and auxiliary power sources before mounting, removing, or wiring the module. Ensure the DIN-rail bus contacts are completely clean and properly aligned before snapping the unit onto the rail to prevent physical damage to the contact pins.
Mount the CH20M DIN-rail bus elements onto the TS 35 DIN rail if they are not already installed.
Align the ACT20-FEED-IN-PRO-S with the rail and snap it firmly into place, ensuring the bus connector pins seat correctly.
Connect the 24 V DC input supply lines to the designated screw terminals using the correct wire gauge and torque specifications.
Wire the collective error relay output to your supervisory control system for active diagnostic monitoring.
การจัดส่งด่วนทั่วโลก
การคืนสินค้าและการรับประกัน
คำสั่งซื้อจะถูกดำเนินการและจัดส่งในวันจันทร์ถึงวันศุกร์ (ไม่รวมวันหยุดราชการ)
สำหรับคุณสมบัติครบถ้วน ค่าธรรมเนียมการเติมสินค้าใหม่ และรายละเอียดการคืนสินค้าระหว่างประเทศ กรุณาดูที่เว็บไซต์อย่างเป็นทางการของเรา นโยบายการคืนเงินและการคืนสินค้า .
| Country of origin |
เยอรมนี
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
