Bently Nevada 21501-24-40-10-02 Proximity Vibration Probe

Stokta sadece 5 adet kaldı

Üretici: Bently Nevada
Ürün No.: 21501-24-40-10-02
Menşei ülke:Amerika Birleşik Devletleri
Ürün Türü: Proximity Probes
Ödeme: T/T, Western Union
Ağırlık: 3000g
Gönderim limanı: Xiamen
Garanti: 12 ay

Description

Engineered for high-accuracy shaft vibration, axial position, and rotational speed measurements on critical machinery, the Bently Nevada 21501-24-40-10-02 serves as a robust proximity vibration probe within industrial protection systems. This 5mm eddy current sensor transmits high-frequency signals to monitor dynamic motion and static position of target shafts relative to the probe tip, enabling early fault detection in rotating equipment. Designed to operate under severe temperature, pressure, and chemical exposure, it provides essential diagnostic inputs for continuous machinery health monitoring and emergency trip systems.

Features

Standard 5mm probe tip diameter optimized for applications with restricted physical clearances.
Rugged 3/8-24 UNF threaded casing constructed for extreme industrial environments.
Premium miniature male coaxial connector (Option 02) ensuring stable signal connection with minimal attenuation.
High-durability insulation and sealing to resist degradation from oils, moisture, and chemical exposure.
Direct integration with Bently Nevada Proximitor sensors for linear calibration and reliable data acquisition.

Applications

Steam, gas, and hydro turbine shaft vibration monitoring.
Centrifugal, axial, and screw compressor displacement tracking.
High-speed gearbox shaft vibration and thrust measurements.
Large electric motor and generator bearing housing monitoring.
Boiler feed pump shaft alignment and runout testing.

Technical Specifications

Manufacturer	Bently Nevada
Part Number	21501-24-40-10-02
Probe Tip Diameter	5 mm
Thread Size	3/8-24 UNF (Standard)
Unthreaded Length (Option 24)	2.4 inches
Overall Case Length (Option 40)	4.0 inches (40 tenths of an inch / approximately 102 mm)
Total Length (Option 10)	1.0 meter (3.9 inches nominal tolerance)
Connector Type (Option 02)	Miniature male coaxial connector
Measurement Type	Radial vibration, axial position, speed, and phase reference (keyphasor)
Country of Origin	United States (U.S.A.)
Shipping Weight	3.0 kg (including protective packaging)

Connections and Interfaces

Connector Component	Function
Miniature Male Coaxial Pin	Transmits high-frequency RF signal from the probe coil to the Proximitor extension cable.
Coaxial Outer Shield	Provides system ground return and EMI shielding to prevent signal corruption.

Installation Guidelines

Always use a calibrated digital voltmeter to verify output voltage gap settings during mechanical installation.
Maintain appropriate clearance between the probe tip and surrounding conductive metals to prevent side-viewing interference.
Route probe extension cabling through dedicated, grounded metal conduits to shield against electromagnetic interference.
Do not exceed the specified installation torque limits on the locknuts to prevent thread deformation or probe casing failure.

Model Number / Title	Condition	Availability	Action
Bently Nevada 330901-00-78-10-02-00 3300 XL NSv Yakınlık Probı	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-11-01 3300 XL 8 mm Yakınlık Probı	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-02-01 3300 XL 8 mm Yakınlık Probı	Original New	In Stock	View Details

Key Features:

#Bently Nevada 3300 #Proximity Probes

What is the primary application of the Bently Nevada 21501-24-40-10-02 probe?

It is used to measure radial dynamic vibration and axial position of rotating machinery shafts, such as turbines, compressors, and high-speed pumps.

What configuration options do the suffixes -24-40-10-02 represent?

They indicate a 2.4-inch unthreaded length (Option 24), a 4.0-inch overall case length (Option 40), a 1.0-meter total sensor length (Option 10), and a miniature male coaxial connector (Option 02).

Does this probe require a Proximitor sensor to function?

Yes, this 5mm proximity probe must be connected via an extension cable to a matching Proximitor sensor to translate the RF signal into a usable voltage output.

Küresel Ekspres Kargo

Standart Teslimat: DHL, FedEx ve UPS ile 4-6 iş günü.
Hızlı Gönderim: Saat 14:00 (GMT+8) öncesi verilen stoktaki siparişler aynı gün gönderilir.
Dünya Çapında Hizmet: Suudi Arabistan ve BAE'ye hızlı teslimat dahil 150'den fazla ülkeye hizmet veriyoruz.

İadeler ve Garanti

30 Günlük Garanti: Stokta bulunan ürünler, orijinal, fabrika mühürlü ambalajında iade kabul edilir.
12 Aylık Garanti: Her endüstriyel bileşen profesyonel teknik garantimizle desteklenmektedir.

Siparişler Pazartesi-Cuma günleri işlenir ve teslim edilir (resmi tatiller hariç).

Tam uygunluk, stok yenileme ücretleri ve uluslararası iade detayları için lütfen resmi sayfamızı inceleyin İade ve Geri Ödeme Politikası .

TECHNICAL SPECIFICATIONS

Country of origin

Son Görüntülenen Ürünler

Teknik bilgi

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Akışkan Güç Sistemlerinin Yerini Almak İçin Tasarlanmış Elektrikli Aktüatörler: Pratik Bir Endüstriyel Otomasyon Rehberi

Bu makale, SMC’nin e-Actuator serisi gibi entegre elektrikli aktüatörlerin, geleneksel pnömatik ve hidrolik sistemlerin yerini alarak endüstriyel hareket kontrolünü nasıl dönüştürdüğünü...

23 Haziran 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

Bently Nevada 21501-24-40-10-02 Proximity Vibration Probe