Bently Nevada 330103-00-04-05-02-00 3300 XL 8 mm Proximity Probe

Description

Option 00 (0 mm unthreaded length) and Option 02 (ClickLoc connector without protector, standard cable) specify this 3300 XL 8 mm probe configuration — 330103-00-04-05-02-00.

The 330103-00-04-05-02-00 is an eddy-current proximity probe used in the Bently Nevada 3300 XL 8 mm Proximity Transducer System. It has an M10 x 1 metric thread and is configured without mechanical armor. This specific configuration features a 0 mm unthreaded case length (Option 00), a 40 mm overall case length (Option 04), a 0.5-meter (1.6 feet) total length (Option 05), a miniature coaxial ClickLoc connector with standard cable (Option 02), and requires no agency approvals (Option 00). The system provides an electrical output directly proportional to the distance between the probe tip and the observed conductive target surface, and is typically used for shaft vibration and axial position measurement on fluid-film bearing machines.

Features

• Option 00 specifies a fully threaded 0 mm unthreaded case length.
• Option 04 specifies a 40 mm overall case length with M10 x 1 metric threads.
• Option 05 specifies a 0.5-meter (1.6 feet) total probe length.
• Option 02 specifies a miniature coaxial ClickLoc connector on standard unarmored cable.
• Option 00 specifies standard configuration with no agency approvals required.
• Standard 8.0 mm probe tip diameter provides backward compatibility with 3300 series 5 mm and 8 mm components.

Applications

• Shaft vibration and axial position monitoring on fluid-film bearing machines.
• Keyphasor reference and rotational speed measurements on steam turbines, gas turbines, and compressors.
• Machinery protection systems in power generation, oil and gas, and petrochemical refining.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Thread Engagement: Do not exceed 15 mm of thread engagement into the mounting bracket or machine casing to prevent binding or thread damage.
• Connector Torque: Two gold ClickLoc connectors must be tightened finger-tight only. Do not use pliers or tools.
• Minimum Bend Radius: Maintain a minimum bend radius of 25.4 mm (1.0 in) for standard coaxial cables to prevent signal attenuation or physical damage.
• Probe Gap: Calibrated linear range is typically gapped to 1.27 mm (50 mils) corresponding to approximately -10 VDC output when used with a 3300 XL Proximitor sensor.

Compliance and Certifications

• CE Mark Directive Compliance
• RoHS Directive Compliance
• Electromagnetic Compatibility (EMC) Directive
• Note: This SKU features Option E: 00 (no agency approvals required) and does not carry hazardous area or -CN (China) approvals.