Bently Nevada 330910-00-13-10-02-00 3300 NSv Proximity Probe

Description

330910-00-13-10-02-00: 3300 NSv proximity probe, M10X1 metric thread, Option 00 unthreaded length (0 mm), Option 13 overall case length (130 mm), Option 10 total length (1.0 m), Option 02 miniature coaxial ClickLoc connector with standard cable, Option 00 agency approvals not required.

The 3300 NSv proximity transducer system is designed for machinery with small target areas or limited installation clearances. Operating as a non-contacting eddy-current sensor, this probe measures static and dynamic shaft displacement, making it suitable for small-bore fluid-film bearing machines, high-speed compressors, and aeroderivative gas turbines. The integrated stainless steel armor protects the fluoropolymer-insulated coaxial cable from abrasion and mechanical damage in demanding industrial environments.

Features

• Option 00 specifies 0 mm unthreaded length for maximum thread engagement.
• Option 13 provides a 130 mm overall metric case length with M10X1 threads.
• Option 10 supplies a 1.0 meter (39 in) total cable length.
• Option 02 features a miniature coaxial ClickLoc connector with standard FEP insulated cable.
• Option 00 indicates that agency approvals are not required for this configuration.
• Flexible AISI 302 stainless steel armor protects the coaxial cable from physical wear.
• Polyphenylene sulfide (PPS) probe tip material offers high chemical and thermal resistance.
• TipLoc molding process creates a high-pressure seal between the probe tip and case.
• CableLoc design delivers 220 N (50 lb) of cable pull strength.

Applications

• Shaft radial vibration and axial position monitoring in small-bore machinery.
• Vibration measurements on aeroderivative gas turbines and high-speed turbocompressors.
• Thrust position measurements in tight-clearance auxiliary equipment.
• Machinery protection systems requiring metric M10X1 threaded armored sensors.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the following practices are observed during installation of the 3300 NSv proximity probe:

• Thread Torque: For M10X1 thread cases, the recommended torque is 11.3 N-m (100 in-lb), with a maximum rated limit of 33.9 N-m (300 in-lb). Do not exceed the maximum torque.
• Minimum Bend Radius: Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial damage.
• Connector Care: Keep coaxial ClickLoc connectors clean and dry. Avoid over-tightening; connect standard ClickLoc connectors finger tight.
• Target Clearance: Verify target size meets the minimum recommended diameter of 13 mm (0.5 in). Maintain adequate sensor tip clearance to avoid cross-talk when multiple probes are installed in parallel or X-Y configurations.