Üretici: Mitsubishi Electric
Ürün No.: FX3GE-40MT/ES
Menşei ülke:Amerika Birleşik Devletleri
Ürün Türü: PLC CPU Modules
Ödeme: T/T, Western Union
Ağırlık: 800g
Boyutlar: 175 mm x 90 mm x 86 mm
Gönderim limanı: Xiamen
Garanti: 12 ay
Managing complex industrial tasks with localized automation is streamlined using the Mitsubishi Electric FX3GE-40MT/ES programmable logic controller. This compact, all-in-one base unit integrates high-performance microprocessing with built-in digital inputs, transistor outputs, analog processing, and dual communication interfaces. Engineered as an extension of the reliable MELSEC FX3G architecture, this controller features embedded Ethernet and USB ports, eliminating the need for external expansion cards in space-constrained control panels.
| Parameter | Specification |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model / Article Number | FX3GE-40MT/ES |
| Series | MELSEC FX3GE |
| Rated Power Supply | 100 to 240 V AC (+10% / -15%), 50/60 Hz |
| Total Integrated I/O Points | 40 points |
| Digital Inputs | 24 Inputs (24V DC, Sink/Source selected by terminal) |
| Digital Outputs | 16 Outputs (Transistor, Sink) |
| Integrated Analog Inputs | 2 Channels (0-10V DC / 4-20mA) |
| Integrated Analog Outputs | 1 Channel (0-10V DC / 4-20mA) |
| Communication Ports | Ethernet (RJ45), USB (Mini-B), RS-422 |
| Memory Capacity | 32,000 steps internal EEPROM program memory |
| Operating Temperature Range | 0 to 55 degC (32 to 131 Fahrenheit) |
| Net Weight | 0.8 kg |
| Dimensions (W x H x D) | 175 mm x 90 mm x 86 mm |
| Terminal Label | Function / Assignment |
|---|---|
| L / N | 100-240 V AC Main Power Supply input |
| 24V / 0V | Auxiliary 24V DC sensor power output supply |
| S/S | Sink/Source selector terminal for digital inputs |
| X000 - X027 | 24V DC Digital Inputs (high-speed counters on first channels) |
| Y000 - Y017 | Transistor Sink Outputs (pulse output functionality on Y000-Y002) |
| V1+, I1+, VI1-, V2+, I2+, VI2- | Analog Inputs (Channel 1 and Channel 2 voltage/current terminals) |
| V3+, I3+, VI3- | Analog Output (Channel 3 voltage/current terminals) |
The FX3GE-40MT/ES offers a direct physical upgrade path for older FX1N-40MT-D and standard FX3G-40MT/ES micro-controllers. Existing FX3G ladder code is fully backward compatible. However, to access the built-in Ethernet parameters and configure analog channels directly without from/to instructions, software development must be completed in GX Works2 (version 1.98 or later).
This controller features standard Transistor Sink outputs (indicated by the MT suffix). Connecting field loads wired as sink logic to an improper polarity source will destroy the internal optocouplers. Ensure that external auxiliary power supplies are properly bonded. Thermal dissipation issues can manifest inside sealed control cabinets if the unit is installed horizontally; strictly adhere to vertical wall-mount layouts allowing a minimum clearance of 50mm above and below the chassis for natural convection airflow.
To prevent electrical noise interference on the integrated analog channels, always separate the 0-10V / 4-20mA routing from high-current AC power cables. Run shielded twisted-pair (STP) wiring for analog loops and terminate the shield ground strictly at the PLC end to block localized ground loop currents from destabilizing sensor values.
CRITICAL WARNING:
Isolate all main power sources prior to conducting installation, mounting, or termination work. Failure to de-energize external circuits can cause severe electrical shock, hardware failure, or unexpected movement of connected actuators.
Mount the controller onto a standard 35mm DIN rail or secure it to a flat backplate using integrated M4 mounting screw points.
Connect the main 100-240 V AC supply source to the terminal block, ensuring correct protective grounding (PE) alignment.
Wire input lines with the selected active polarity (Sink or Source orientation configured through the S/S terminal).
Connect program transmission via Ethernet or USB, launch GX Works2, and run diagnostic procedures to verify hardware registers.
Küresel Ekspres Kargo
İadeler ve Garanti
Siparişler Pazartesi-Cuma günleri işlenir ve teslim edilir (resmi tatiller hariç).
Tam uygunluk, stok yenileme ücretleri ve uluslararası iade detayları için lütfen resmi sayfamızı inceleyin İade ve Geri Ödeme Politikası .
| Country of origin |
Amerika Birleşik Devletleri
|
Bu makale, SMC’nin e-Actuator serisi gibi entegre elektrikli aktüatörlerin, geleneksel pnömatik ve hidrolik sistemlerin yerini alarak endüstriyel hareket kontrolünü nasıl dönüştürdüğünü...
Bu makale, PLC sistemlerinin endüstriyel otomasyonda toplama, çıkarma, çarpma, bölme, mod alma ve üs alma gibi temel matematiksel işlemleri nasıl gerçekleştirdiğini açıklar. Bu fonksiyon bloklarının,...
Makale, temel AND, OR ve NOT işlemlerinin ötesinde PLC programlamada kullanılan birkaç gelişmiş Boolean mantık fonksiyonunu açıklar. Doğruluk tabloları, çoklayıcılar, darbe üreteçleri ve Schmitt...
Boolean mantığı her PLC programının temelidir. Basit makine kontrollerinden karmaşık endüstriyel otomasyon sistemlerine kadar, mantık kapıları kontrolörlerin değişen girişlere ve çalışma koşullarına...
Endüstriyel güvenlik duvarları, PLC, DCS ve SCADA ağlarını segmentasyon, giriş/çıkış kontrolü ve IEC 62443 prensipleriyle uyumlu IDS/IPS entegrasyonu yoluyla koruyarak OT siber güvenliğinde kritik...
Modern robot tutucular, geleneksel mekanik çenelerin ötesine geçiyor. Geckoya ilham veren yapışkan sistemlerden yumuşak gıda sınıfı tutuculara ve yapay zeka destekli depo araçlarına kadar gelişmiş...
