Bently Nevada 330130-045-02-00 3300 XL Standard Extension Cable

Description

Option 045 (4.5 m cable length) and Option 02 (standard cable with connector protector) specify this 3300 XL standard extension cable configuration — 330130-045-02-00. This non-armored standard cable matches with a 3300 XL 8 mm proximity probe and Proximitor sensor to form a complete 5-meter or 9-meter transducer system (when combined with a 0.5-meter probe). The integrated connector protector provides environmental shielding for the miniature coaxial ClickLoc connection, protecting standard operations on fluid-film bearing machinery.

Compared to the unshielded connector option (Option 00) or armored versions (Option 01 and Option 03), the Option 02 configuration includes a pre-installed fluorosilicone connector protector on the female connector end without the extra weight of stainless steel armor. This option is suitable for installations where physical routing is standard but connector environmental protection is desired.

Features

• Option 045 design delivering exactly 4.5 meters (14.8 feet) of extension length to match system tuning.
• Option 02 configuration featuring a pre-installed fluorosilicone environmental connector protector.
• Option 00 standard construction for installations without hazardous area certification requirements.
• Corrosion-resistant coaxial ClickLoc connections utilizing gold-plated brass contact materials.
• Triaxial cable structure insulated with fluoroethylene propylene (FEP) for high chemical resistance.
• Integrated patented CableLoc mechanism providing pull-strength protection at the connector-to-cable transition.

Applications

• Radial shaft vibration monitoring on medium-to-large machinery.
• Axial thrust position measurements on utility steam and gas turbines.
• Rotor dynamic studies on high-speed industrial compressors and turbo-expanders.
• Keyphasor timing and phase reference signal transmission on production machinery.

Ordering Information

Technical Specifications

Installation Guidelines

Maintain the minimum bend radius of 25.4 mm (1.0 in) along the entire cable run to avoid fracturing the internal triaxial conductors. Ensure the gold-plated ClickLoc connectors are connected finger-tight; they will provide a mechanical click once fully seated. Do not apply tools for tightening unless using an approved torque wrench set to a maximum of 0.565 N-m (5 in-lbf). Slide the pre-installed fluorosilicone connector protector over the mated connection to shield it against environmental moisture, oil, and contaminants.