ABB 3ASD489301A410 YPK 107E Legacy DC Drives Communication Module

Only 3 item(s) left in stock

Manufacturer: ABB
Product No.: 3ASD489301A410
Country of origin:Thụy Sĩ
Product Type: Communication Module
Barcode: 85389091
Payment: T/T, Western Union
Weight: 390g
Dimensions: 30.4 cm x 15.4 cm x 3 cm
Shipping port: Xiamen
Warranty: 12 months

Description

The ABB 3ASD489301A410 YPK 107E is a multi-processor communication board configured with integrated operational software for legacy industrial DC drive systems. Operating as a core data routing interface within specialized drive intelligence networks, this component processes multi-processor commands and manages critical synchronization tasks across distributed drive components. The assembly provides structural backplane connectivity and protocol processing to maintain clean signal pathways, serving as an engineered replacement to resolve communication time-outs, node dropouts, and command processing faults in legacy drive infrastructure.

Features

Pre-Loaded Firmware: Shipped complete with factory MP-COMM system software pre-installed on the onboard logic chips.
Broad Legacy Support: Engineered explicitly for industrial DC drive control racks utilizing legacy multi-processor architectures.
Dual-Model Supercession: Serves as the factory-designated direct replacement for obsolete product IDs YT204001-EC and YT204001-HC.
Chassis Mounting: Rigid PCB frame architecture with integrated interface pin headers for standardized rack backplane insertion.

Applications

Overhaul and logic board replacement in legacy ABB industrial DC drive systems.
Multi-processor network stabilization in metals processing, rolling mills, and mining sector drive control panels.
Upgrading degraded communication interfaces showing intermittent data transmission errors or frame drops.

Technical Specifications

Parameter	Value
Manufacturer	ABB
ABB Type Designation	YPK 107E
Product ID	3ASD489301A410
Replaced Product IDs (Old)	YT204001-EC, YT204001-HC
Software Integration	MP-COMM Software Included
Part Type	Original New
UNSPSC Classification	39120000
Country of Origin	Sweden (SE)
Customs Tariff Number	85389091
Product Net Weight	0.390 kg
Shipping Weight (Calculated)	0.650 kg
Package Dimensions (Calculated)	240 x 170 x 60 mm

Installation Guidelines

CRITICAL WARNING:

Disconnect and lock out all AC mains and auxiliary power feeds to the drive enclosure before removing processing hardware. High-voltage DC buses retain hazardous charges even after power-down. Verify that bus capacitor voltages have fully discharged to safe levels using a certified voltmeter before handling internal circuitry.

Attach an approved, tested electrostatic discharge wrist strap to a verified bare-metal chassis ground point prior to opening the anti-static packaging.

Tag and disconnect all internal ribbon interfaces, serial cables, and terminal connections from the active board face to prevent strain on external harnesses.

Loosen the retaining screws, unlatch the card guides, and slide the legacy board smoothly out from the subrack backplane connectors.

Align the new board along the mounting tracks, push firmly until seated into the rear backplane socket, tighten retention fasteners, and reconnect all communication lines.

Key Features:

#Communication Modules

Is the software required for the module included with this item?

Yes, this product is shipped with the proprietary MP-COMM system software pre-loaded on the module internal storage.

Can this board replace older part numbers like YT204001-HC?

Yes, this component is the factory-designated direct replacement for both YT204001-EC and YT204001-HC legacy items.

Does this card handle high voltage drive connections directly?

No, this is a multi-processor logic and communication interface module that processes low-voltage data signals; it does not connect directly to primary power lines.

Vận chuyển nhanh toàn cầu

Giao hàng tiêu chuẩn: 4-6 ngày làm việc qua DHL, FedEx và UPS.
Giao hàng nhanh: Giao hàng trong ngày cho đơn đặt hàng có sẵn trong kho trước 2:00 chiều (GMT+8).
Phủ sóng toàn cầu: Phục vụ hơn 150 quốc gia, bao gồm giao hàng nhanh đến Saudi Arabia và UAE.

Trả hàng & Bảo hành

Đảm bảo 30 ngày: Chấp nhận trả hàng cho sản phẩm có sẵn trong kho với bao bì nguyên bản, niêm phong từ nhà máy.
Bảo hành 12 tháng: Mỗi linh kiện công nghiệp đều được bảo hành kỹ thuật chuyên nghiệp.

Đơn hàng được xử lý và giao từ thứ Hai đến thứ Sáu (không bao gồm ngày lễ).

Để biết đầy đủ điều kiện, phí lưu kho và chi tiết trả hàng quốc tế, vui lòng xem trang chính thức của chúng tôi Chính sách Hoàn tiền & Trả hàng .

TECHNICAL SPECIFICATIONS

Color pattern	Xanh lá cây
Country of origin	Thụy Sĩ

Sản phẩm đã xem gần đây

Kiến thức kỹ thuật

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

23 Tháng 6, 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

ABB 3ASD489301A410 YPK 107E Legacy DC Drives Communication Module