ABB YT204001-HC YPK 107E Legacy DC Drives Communication Module

Only 3 item(s) left in stock

Manufacturer: ABB
Product No.: YT204001-FY
Country of origin:Thụy Điển
Product Type: CoMMunication Modules
Barcode: 85389091
Payment: T/T, Western Union
Weight: 360g
Dimensions: 180 x 130 x 40 mm
Shipping port: Xiamen
Warranty: 12 months

Description

The ABB YT204001-HC YPK 107E is a dedicated multi-processor communication interface board equipped with pre-loaded factory software, engineered for legacy ABB industrial DC drive systems. Operating as a critical data exchange bridge within the specialized YGMP and YHMP hardware architectures, this unit executes high-speed serial processing and bus management protocols to synchronize drive control metrics with supervisory automation layers. By maintaining exact signal timing and bus arbitration, the YPK 107E mitigates network latency and communication drops, serving as an essential component for sustaining older industrial powertrain installations.

Features

Integrated Firmware: Comes configured with factory MP-COMM system software pre-installed for immediate deployment.
Platform Specificity: Designed for native electrical and physical interface compatibility with YGMP and YHMP legacy DC drives.
Lifecycle Support Path: Acts as the certified update pathway for the older, obsolete YT204001-FY product ID.
Dual-Bus Reliability: Engineered to stabilize processing pipelines between core drive hardware and peripheral control units.

Applications

Network communication expansion in legacy ABB industrial DC drive cubicles.
Replacement of failed multi-processor link boards in heavy metal rolling mills and paper processing lines.
Sustaining factory automation systems reliant on legacy YGMP and YHMP serial architectures.

Technical Specifications

Parameter	Value
Manufacturer	ABB
ABB Type Designation	YPK 107E
Product ID	YT204001-HC
Replaced Product ID (Old)	YT204001-FY
Replacement Product ID (New)	3ASD489301A410
System Compatibility	Legacy DC Drives (YGMP / YHMP)
Software Configuration	MP-COMM Software Included
Condition	Original New
Country of Origin	Sweden (SE)
Customs Tariff Number	85389091
Product Net Weight	0.001 kg
Shipping Weight (Calculated)	0.250 kg
Package Dimensions (Calculated)	180 x 130 x 40 mm

Installation Guidelines

CRITICAL WARNING:

Isolate all primary and control power sources supplying the DC drive housing before removing covers or handling internal electronics. Communications links may carry induced voltages from surrounding power components. Confirm a total zero-energy state across all terminals prior to intervention to prevent component frying or personal injury.

Don an approved ESD grounding wrist strap and verify its connection to the system panel frame before handling the communication board.

Carefully unseat the existing interface module by unlocking any plastic retention standoffs or side brackets, then pull the board straight out from the bus connector.

Align the replacement module pins precisely with the targeted backplane slot. Apply uniform, gentle pressure on both edges until the board snaps into the mounting tracks.

Secure all serial, ribbon, or specialized connection cables. Execute standard diagnostic power-up sequences to verify initialization of the onboard MP-COMM software.

Key Features:

#Communication Modules

Does this communication module require separate software licensing?

No, this module is delivered with the necessary MP-COMM internal multi-processor communication system software pre-loaded onto the hardware components.

What is the relation between part numbers YT204001-HC and YT204001-FY?

The YT204001-HC unit functions as the direct factory replacement and update path for the older, obsolete part number YT204001-FY.

Is any hardware reconfiguration needed when swapping a legacy board for this piece?

This module is a direct drop-in replacement engineered for YGMP and YHMP architectures. However, you must verify that any onboard jumper settings or DIP switch positions match your original plant configuration before power-on.

Vận chuyển nhanh toàn cầu

Giao hàng tiêu chuẩn: 4-6 ngày làm việc qua DHL, FedEx và UPS.
Giao hàng nhanh: Giao hàng trong ngày cho đơn đặt hàng có sẵn trong kho trước 2:00 chiều (GMT+8).
Phủ sóng toàn cầu: Phục vụ hơn 150 quốc gia, bao gồm giao hàng nhanh đến Saudi Arabia và UAE.

Trả hàng & Bảo hành

Đảm bảo 30 ngày: Chấp nhận trả hàng cho sản phẩm có sẵn trong kho với bao bì nguyên bản, niêm phong từ nhà máy.
Bảo hành 12 tháng: Mỗi linh kiện công nghiệp đều được bảo hành kỹ thuật chuyên nghiệp.

Đơn hàng được xử lý và giao từ thứ Hai đến thứ Sáu (không bao gồm ngày lễ).

Để biết đầy đủ điều kiện, phí lưu kho và chi tiết trả hàng quốc tế, vui lòng xem trang chính thức của chúng tôi Chính sách Hoàn tiền & Trả hàng .

TECHNICAL SPECIFICATIONS

Color pattern	Xanh lá cây
Country of origin	Thụy Điển

Sản phẩm đã xem gần đây

Kiến thức kỹ thuật

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

23 Tháng 6, 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

ABB YT204001-HC YPK 107E Legacy DC Drives Communication Module