Bently Nevada 330103-02-12-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-02-12-05-02-05 is a 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 thread, 0.2 inch unthreaded length (Option 02), 1.2 inch case length (Option 12), and 0.5 meter total system length (Option 05). This unit is equipped with a miniature coaxial ClickLoc connector and standard cable (Option 02), and includes CSA, ATEX, and IECEx hazardous area approvals (Option 05).

As part of the Bently Nevada 3300 XL 8 mm proximity transducer system, this probe provides non-contact displacement measurement for critical machinery. It is designed to work in tandem with the 3300 XL Proximitor sensor and 3300 XL extension cable to measure shaft vibration and axial position. The M10 x 1 threading offers a metric installation interface suitable for various machinery casings.

Features

• M10 x 1 thread configuration for metric machinery mounting.
• 0.2 inch unthreaded length and 1.2 inch case length.
• 0.5 meter system length compatible with matching 3300 XL Proximitor sensors.
• Miniature coaxial ClickLoc connector with standard cable for secure, reliable signal connection.
• Agency approval package including CSA, ATEX, and IECEx for hazardous area operation.

Applications

• Turbine and compressor shaft vibration monitoring.
• Rotor axial position measurement.
• Critical rotating machinery protection in industrial environments.
• High-accuracy displacement sensing for plant diagnostic systems.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is mounted using appropriate Bently Nevada brackets to maintain electrical isolation if required. The probe gap must be set according to the 3300 XL Proximitor sensor calibration chart. Cables should be routed away from high-voltage lines to prevent electromagnetic interference. In hazardous areas, ensure the installation complies with local site safety drawings (e.g., drawing 141092 for ia installations).

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres)