Bently Nevada 330101-00-18-10-12-05 3300 XL 8 mm Proximity Probe

Description

Designed for reliable machinery protection and condition monitoring, the Bently Nevada 330101-00-18-10-12-05 is an eddy-current 8 mm proximity probe configuration specifically featuring a FluidLoc cable and a fully threaded 1.8-inch case length with zero unthreaded length. Engineered to prevent process fluids and lubrication oil from migrating through the cable interior, this variant is ideal for pressurized bearing housings. It is supplied with a 1.0-meter total length, a standard miniature ClickLoc connector, and comes with CSA, ATEX, and IECEx hazardous area approvals to ensure safety in explosive environments.

This proximity probe functions as a non-contact sensor that continuously measures the static and dynamic distance between the probe tip and a target shaft. This data is critical for monitoring radial vibration, axial position, and speed on key rotating machinery such as steam turbines, gas turbines, compressors, pumps, and generators. When paired with a 3300 XL Proximitor sensor and extension cable, the probe forms an exceptionally stable transducer system with high interchangeability and a linear range of 2.0 mm (80 mils).

Features

• FluidLoc cable option prevents oil and other liquids from leaking out of the machine housing through the cable's interior.
• Fully threaded 1.8-inch case length without armor provides robust direct-mount installation.
• 8 mm tip diameter optimized for eddy-current displacement measurements over a standard 80-mil (2.0 mm) range.
• Gold-plated ClickLoc connectors require only finger-tight torque and resist vibration-induced loosening.
• AISI 303/304 stainless steel case material and polyphenylene sulfide (PPS) tip for maximum survival in harsh environments.
• Certified for hazardous area installations under major global standards (ATEX, IECEx, CSA).

Applications

• Steam and gas turbine shaft vibration monitoring.
• Centrifugal compressor and high-pressure pump rotor displacement measurement.
• Thrust bearing wear and axial shaft position tracking.
• Industrial machinery protection in environments where oil/fluid sealing through cables is a requirement.

Ordering Information

Technical Specifications

Installation Guidelines

• Probe Gap Calibration: Verify that the probe gap is adjusted to the correct voltage (typically -10 VDC for standard midrange) per system calibration procedures before securing.
• Thread Engagement Limits: For 3/8-24 UNF threaded cases, do not exceed a maximum engagement length of 0.563 inches to prevent mounting threads from binding.
• Cable Handling: Ensure that the minimum cable bend radius of 25.4 mm (1.0 inch) is respected during routing to prevent internal conductor damage.
• Connector Connection: Wipe the gold ClickLoc connectors clean before mating. Finger-tighten until they "click." Do not use pliers or other tools on standard XL connections.

Compliance and Certifications

• CSA: Approved for Class I, Division 1 and 2 hazardous areas with applicable barriers.
• ATEX: Intrinsically safe and non-incendive certifications for Zone 0 and Zone 2 explosive atmospheres (option 05).
• IECEx: Global hazardous area certification including Ex ia and Ex nA safety protocols.