Bently Nevada 330130-040-00-05 3300 XL Standard Extension Cable

Description

330130-040-00-05 specifies this 3300 XL Standard Extension Cable configuration with a length of 4.0 meters (13.1 feet), a standard non-armored FEP cable design, and CSA, ATEX, and IECEx hazardous area approvals. This coaxial cable operates as a matching electrical transmission line to connect a 3300 XL 8 mm proximity probe to its corresponding Proximitor sensor, completing a high-precision proximity transducer circuit for non-contact shaft vibration and displacement monitoring.

Selecting the non-armored Option 00 configuration provides a lighter, more flexible cable path with a reduced maximum outer diameter of 3.7 mm, allowing for easier routing through standard protective conduit. Unlike armored variants designed for direct exposure to abrasive environments, this option relies on external conduit or cable trays for mechanical protection while maintaining the same premium electrical characteristics and gold-plated ClickLoc connector interface.

Features

• Option 040 designates a precise 4.0-meter (13.1 feet) cable length to satisfy specific physical installation layouts.
• Option 00 specifies standard non-armored Fluorinated Ethylene Propylene (FEP) cable insulation with a maximum diameter of 3.7 mm.
• Option 05 incorporates CSA, ATEX, and IECEx agency approvals for hazardous area environments.
• Miniature gold-plated ClickLoc coaxial connectors (male and female) establish a secure, finger-tight mechanical and electrical coupling without tools.
• Compatible with standard Bently Nevada 3300 XL 8 mm proximity probes and Proximitor sensors.

Applications

Used for machinery vibration, axial position, and shaft keyphase measurement on critical industrial rotating machinery. This cable is typically installed in power generation plants, oil and gas processing facilities, and chemical plants on steam turbines, gas turbines, centrifugal compressors, industrial pumps, and large electric motors where hazardous area certifications are required.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

Ensure the extension cable length combined with the proximity probe length matches the total calibrated length of the Proximitor sensor (typically 5.0 meters or 9.0 meters total system length). Connectors must be kept clean, dry, and free of oil during assembly. Tighten connections finger-tight. Slide a protective connector sleeve or apply silicone self-fusing tape over the connection to provide environmental sealing when installed in harsh environments.