Bently Nevada 330130-040-01-CN 3300 XL Standard Extension Cable

Description

Option 040 (4.0 meters length) and Option 01 (armored cable) specify this 3300 XL standard extension cable configuration — 330130-040-01-CN.

This specific configuration features integrated stainless steel armored protection surrounding the coaxial cable, preventing mechanical wear, pinching, and crushing in heavy-duty industrial setups. Unlike unarmored standard options (Option 00) or assemblies featuring pre-installed connector protectors (Option 02 and 03), the Option 01 model delivers flexible armor coverage while maintaining a low-profile coaxial interface that simplifies cable pulling through narrow conduits. The -CN suffix certifies compliance with China industrial hazardous area safety requirements, incorporating NEPSI and CCC approvals with appropriate labeling for integration into machinery protection systems within mainland China.

Features

• Option 040 provides a 4.0 m (13.1 feet) physical cable length, enabling precise matching with proximity probe leads and Proximitor sensor systems.
• Option 01 incorporates robust, flexible stainless steel armor over the 75 ohm triaxial coaxial cable body to defend against abrasive or mechanical hazards.
• The -CN designation certifies official NEPSI and CCC hazardous area approvals for safe deployment in Chinese mainland industrial facilities.
• Gold-plated brass miniature ClickLoc connectors support reliable mechanical connection using finger-tight torque limits with a tactile click mechanism.
• Maintains high electrical stability and temperature performance matched with the entire Bently Nevada 3300 XL 8 mm transducer family.

Applications

Commonly applied in machinery monitoring across power generation, petrochemical plants, and large-scale industrial facilities. The armored construction suits severe physical routing paths, while the Chinese regional cert package meets hazardous environment plant regulations.

Ordering Information

Technical Specifications

Installation Guidelines

When installing the cable, ensure the sum of the probe length and the extension cable length exactly matches the Proximitor sensor total length requirement (e.g., a 5-meter system or 9-meter system configuration). Run the armored cable through appropriate flexible or rigid conduit systems when crossing machine casings or routing through heavy foot-traffic areas. Avoid bending the flexible armor beyond its minimum allowable bend radius (typically 25.4 mm or 1.0 in) to prevent damage to the internal coaxial core. Hand-tighten the gold-plated miniature ClickLoc connectors until an audible or tactile click is registered; do not utilize pliers or metallic wrenches on these standard click connectors unless mating with legacy stainless steel non-XL hardware, which requires hand-tight plus 1/8 turn.

Compliance and Certifications