Siemens 6AV7423-2AA01-0LS0 SIMATIC HMI IPC677C Panel PC

Only 3 item(s) left in stock

Manufacturer: Siemens
Product No.: 6AV7423-2AA01-0LS0
Country of origin:Deutschland
Product Type: Industrial Panel PC
Barcode: 85371091
Payment: T/T, Western Union
Weight: 12000g
Dimensions: 55,0 x 45,0 x 25,0 cm
Shipping port: Xiamen
Warranty: 12 months

Description

The Siemens 6AV7423-2AA01-0LS0 is a high-performance industrial workstation designated as a SIMATIC HMI IPC677C, engineered to handle simultaneous human-machine interface (HMI) visualization and demanding real-time machine control tasks. This heavy-duty system features a broad 15-inch display paired with an integrated rugged tactile keypad layout supporting a native resolution of 1024 x 768 pixels. It is equipped with dual integrated 10/100/1000 Mbit/s Gigabit Ethernet ports for independent control and corporate IT routing, four rear-mounted USB 2.0 ports, and a front-side USB port for quick maintenance access. Plant-floor reliability is optimized via an onboard hardware RAID controller for data redundancy alongside persistent internal system watchdog, temperature, and fan status monitoring circuits. Operating on an industrial wide-range 110/230 V AC power supply designed to strict NAMUR specifications, this obsolete hardware serves as a critical drop-in node to maintain continuous uptime across legacy production lines.

Features

Keypad-Driven Display Node: Ruggedized 15-inch display with a built-in industrial keypad panel interface designed for reliable operator inputs in harsh environments.
Dual-Channel Gigabit Trunking: Equipped with two independent 10/100/1000 Mbit/s Ethernet interfaces to ensure clean operational network segmentation.
Fault-Tolerant Storage System: Integrated hardware RAID controller enables real-time storage mirroring to minimize mechanical failure risks and process downtime.
Proactive Health Diagnostics: Onboard watchdog micro-circuits alongside direct fan and temperature monitoring utilities maintain system integrity.

Applications

Supervisory Control & SCADA Nodes: Central machine-level visualization terminal designed for managing distributed plant sectors and assembly structures.
Manufacturing Execution Systems (MES): High-reliability computing node for localized material tracking, recipe management, and ERP data interfacing.
Legacy System Architecture Support: Drop-in direct-replacement platform to ensure continuous execution of custom control systems running on vintage IPC677C setups.

Technical Specifications

Specification Parameter	Verified Technical Value
Manufacturer	Siemens
Model Number	6AV7423-2AA01-0LS0
Product Series	SIMATIC Panel PC IPC677C
Product Type	Industrial Panel PC HMI Workstation
Display Dimensions	15-inch Display
Operator Interface	Integrated Tactile Keypad Panel
Native Resolution	1024 x 768 pixels
Mains Power Configuration	110/230 V AC Power Module (NAMUR Compliant)
Network Interfaces	2 x 10/100/1000 Mbit/s Gigabit Ethernet Ports
USB Ports	4 x USB 2.0 (Rear Face), 1 x USB Interface (Front Face)
Serial Interface	1 x COM1 (RS-232)
Data Redundancy	Onboard Hardware RAID Controller Module
Diagnostic Monitoring	Watchdog, Internal Temperature Control, Fan Status Control
Product Phase Status	Obsolete / Legacy Production Node
Country of Origin	Germany
Net Shipping Weight	12.00 kg
Package Dimensions (Calculated)	55.0 x 45.0 x 25.0 cm

Installation Guidelines

CRITICAL WARNING:

Isolate, shut down, and verify all upstream electrical feeder channels prior to mechanical mounting. Ensure total compliance with proper Lockout/Tagout (LOTO) procedures. Cabinet wiring and hardware provisioning must be completed exclusively by certified industrial engineering personnel.

Enclosure Verification: Ensure the target electrical cabinet is fully de-energized, checking for the absolute absence of residual voltage using a properly calibrated testing tool.

Cutout Dimensions Audit: Cross-check the panel layout cutout geometry against the exact installation footprint of the IPC677C chassis. Confirm the surface area is clean, flat, and structurally reinforced.

Workstation Alignment & Clamping: Seat the workstation into the prepared cutout from the front. Secure the frame tightly from the rear side using all supplied mounting brackets, applying uniform torque to create a tight front gasket seal.

Protective Earth Grounding: Run a dedicated, low-impedance copper protective earth (PE) grounding wire directly to the chassis ground stud. This step is mandatory to minimize electromagnetic interference (EMI) and establish safety boundaries.

Mains Power Termination: Wire the main 110/230 V AC supply cables (Line, Neutral, and Earth) straight into the designated power distribution block terminals, verifying that feed voltages fit the product nameplate ratings.

Trunk Interface Connections: Attach all structural communication links, Gigabit Ethernet connections, serial lines, and USB cables. Utilize proper cord tracking mechanisms to prevent accidental strain or mechanical disconnects.

Enclosure Boot Evaluation: Secure the enclosure door assemblies, restore branch circuit power, and monitor the device initialization phase to verify complete boot performance and network link state connectivity.

Key Features:

#Panel PC HMIs #Siemens SIMATIC

Welchen Benutzereingabemechanismus verwendet dieses spezielle SIMATIC HMI-Panel?

Dieses Modul verfügt über ein integriertes robustes industrielles Tastatur-Layout anstelle eines standardmäßigen reinen Touch-Designs, das eine präzise taktile Bedienung ermöglicht.

Wie handhabt das Onboard-Speicherlayout Fehlertoleranz und Datenredundanz?

Die Workstation ist mit einer integrierten Hardware-RAID-Controller-Konfiguration ausgestattet, die gleichzeitiges Spiegeln der Laufwerke ermöglicht, um Datenverluste bei Laufzeitfehlern zu verhindern.

Welche elektrischen Normen gelten für das Wechselstrom-Stromversorgungsmodul in diesem Gerät?

Das Computersystem arbeitet über eine integrierte Weitbereichs-Stromversorgungseinheit mit 110/230 V Wechselstrom, die speziell zur Erfüllung robuster industrieller NAMUR-Spezifikationen konfiguriert ist.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .