Siemens 6AV7611-0AA12-0BE0 SIMATIC Panel PC 670 Panel PC

Nur noch 5 Artikel auf Lager verfügbar

Hersteller: Siemens
Produkt-Nr.: 6AV7611-0AA12-0BE0
Herkunftsland:Deutschland
Produkttyp: Panel PC
Strichcode: 85371091
Zahlung: T/T, Western Union
Gewicht: 12g
Abmessungen: 35.0 x 25.0 x 25.0 cm
Versandhafen: Xiamen
Garantie: 12 Monate

Description

The Siemens 6AV7611-0AA12-0BE0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) applications. This standard configuration unit features a 10-inch TFT display, a Pentium III 500 MHz CPU, 64 MB of RAM, and a 20 GB hard drive. It is configured for a 115-230V AC power supply and includes a U.S. mains cable. This specific model is supplied with a pre-installed German-language version of the Windows 98 operating system. Please note that this product is considered obsolete by the manufacturer, making it suitable for maintaining or repairing legacy automation systems.

Features

■10-inch TFT color display
■Intel Pentium III 500 MHz processor
■64 MB of installed RAM
■20 GB internal hard drive storage
■Wide input voltage range of 115-230V AC
■Pre-loaded with Windows 98 (German language)

Applications

■Legacy machine control and process visualization
■Spare part for existing SIMATIC PC 670 installations
■Data logging and monitoring stations
■Simple SCADA nodes in older systems

Technical Specifications

Specification	Value
Manufacturer	Siemens
Part Number	6AV7611-0AA12-0BE0
Product Range	SIMATIC Panel PC
Series	PC 670
Display	10-inch TFT
Processor (CPU)	Pentium III, 500 MHz
Memory (RAM)	64 MB
Storage	20 GB Hard Drive (HD)
Operating System	Windows 98 (German)
Input Voltage	115-230 V AC
Product Lifecycle Status	Obsolete
Shipping Weight	12.00 kg
Package Dimensions (Calculated)	35.0 x 25.0 x 25.0 cm
Commodity Code	85371091
ECCN	N (Not subject to export control regulations)
Country of Origin	Germany (estimated)

Installation Guidelines

CRITICAL WARNING: Hazardous voltages are present. Installation must be performed by qualified personnel only. Failure to de-energize equipment before installation can result in severe injury or death. Always follow local Lockout/Tagout (LOTO) procedures.

1
De-energize System: Before installation, completely disconnect and lock out all power sources to the control cabinet or mounting location. Verify the absence of voltage with a properly rated meter.
2
Prepare Mounting Location: Ensure the panel cutout is clean, free of burrs, and matches the PC 670's dimensions. Verify that there is adequate clearance for ventilation and cable routing behind the panel.
3
Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel gasket. Do not overtighten.
4
Connect Grounding: Connect the chassis ground terminal on the Panel PC to the cabinet's protective earth (PE) bus bar using a low-impedance conductor. This is critical for safety and noise immunity.
5
Connect Power and Peripherals: Connect the AC mains cable to the unit and to the power source. Connect all required communication cables (e.g., Ethernet, serial) and I/O devices. Ensure proper cable strain relief.
6
System Power-Up: After verifying all connections, remove LOTO devices and re-apply power to the cabinet. Power on the Panel PC and confirm that the operating system loads correctly.

Key Features:

What operating system is installed on this Panel PC?

This unit, part number 6AV7611-0AA12-0BE0, comes pre-installed with a German-language version of Windows 98.

What are the core hardware specifications of this device?

It is equipped with a 10-inch TFT display, a Pentium III 500 MHz CPU, 64 MB of RAM, and a 20 GB hard drive.

Is this a current product?

No, the Siemens SIMATIC Panel PC 670 series is designated as an obsolete product. It is primarily used as a spare part for existing, legacy systems.

What is the required input power for this unit?

The device operates on a wide voltage range of 115-230V AC and is supplied with a U.S. mains cable.

Globaler Expressversand

Standardlieferung: 4-6 Werktage per DHL, FedEx und UPS.
Expressversand: Versand am selben Tag für vorrätige Bestellungen, die vor 14:00 Uhr (GMT+8) eingehen.
Weltweite Abdeckung: Wir beliefern über 150 Länder, einschließlich schneller Lieferung nach Saudi-Arabien und in die VAE.

Rückgaben & Garantie

30-Tage-Garantie: Rückgaben werden für vorrätige Produkte in originaler, werkversiegelter Verpackung akzeptiert.
12-Monats-Garantie: Jede Industriekomponente ist durch unsere professionelle technische Garantie abgesichert.

Bestellungen werden von Montag bis Freitag bearbeitet und geliefert (außer an Feiertagen).

Für vollständige Anspruchsvoraussetzungen, Wiedereinlagerungsgebühren und internationale Rückgabebedingungen lesen Sie bitte unsere offiziellen Rückerstattungs- & Rückgaberecht .