Beckhoff CP7212-0001-0060 CP72xx Economy Panel PC

Description

Designed for mounting arm installation in demanding manufacturing environments, the CP7212-0001-0060 Panel PC combines a high-resolution 15-inch display control panel with an integrated high-performance industrial PC. This Economy Panel PC is housed in a rugged, fully enclosed IP65-rated aluminum housing, providing direct-at-the-machine operation without requiring a control cabinet. Equipped with a 3.5-inch motherboard and a dual-core Intel processor, the system is engineered to run TwinCAT automation software and process-intensive HMI applications efficiently.

Features

• Rugged Enclosure: Full aluminum housing providing complete dust and water jet protection rated to IP65.
• Mounting Compatibility: Equipped with a rotatable mounting arm adapter suitable for Rittal and Rolec 48 mm diameter top-entry suspension tube systems.
• Thermal Management: Efficient passive cooling via an external heat sink structure, assisted by an internal fan to distribute heat uniformly across the housing walls.
• Sizable Storage Options: Features dedicated internal slots for one 2.5-inch hard disk or SSD and one CFast card.
• Reliable Connectivity: Built-in dual 100/1000BASE-T Ethernet interfaces with support for push-pull industrial connection standards.
• Integrated RAID: On-board SATA RAID 1 controller for system redundancy and operational data security.

Applications

• Operator interface and control terminal for machinery automation.
• Process visualization and monitoring in food, chemical, and pharmaceutical plants.
• Automated assembly and manufacturing line control stations.
• Suspended mounting control stations in automotive and metalworking facilities.

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Mounting: Attach to a compatible Rittal or Rolec mounting arm using the integrated rotatable adapter for 48 mm tubes. Ensure all fasteners are torqued to spec.
• Cooling Clearance: To allow adequate passive convection cooling, maintain at least 20 cm (7.9 inches) of free air space around all sides of the Panel PC.
• Wiring: Route cables through the protective tube of the mounting arm directly into the IP65 sealed wiring area. Ensure unused connector glands are fully sealed with IP65-rated blanks.